Get the most out of your home audio system by ensuring the best connection from your speaker cable to your receiver with Deadbolt Banana plugs. Using self-crimping teeth these plugs provide a simple, secure, and low profile connection without requiring soldering or screws.
Easy to install:
- Unscrew the cap off the Deadbolt Banana Plug.
- Feed the bare conductor of the speaker wire through the center hole of the banana plug. (strip wire about 1/2")
- Bend the wires of the speaker wire down around the teeth.
- Replace the cap to secure the speaker wire.
- Your Deadbolt Banana Plug is ready for connection.
Premium Materials
- 24k Gold Plating on Connector and Crimping Teeth
- Pure, High Density Copper Connector
- Heavy Duty Brass (black) Casing
Straight vs Right-Angle
Both options are great depending on your setup and how close to the wall you need your speakers to be.
Why Banana Plugs?
This banana plug interface is found on audio/video receivers, speaker wall plates, and more. Banana plugs offer an alternative to inserting a bare speaker wire into your equipment. Bare wire connections tend to get pulled out or frizzy after time passes, are prone to corrosion, and are a hassle to insert onto the equipment. Banana plugs offer a quick and secure connection that is both reliable and makes future changes painless.
Specifications
- 4mm Tip
- 24k Gold Plating on Connector and Crimping Teeth
- Pure, High Density Copper Connector
- Heavy Duty Brass (black) Casing
- Maximum accepted AWG: 8 AWG (10 AWG suggested)
- Maximum Jacket AWG: 2 AWG~ (1/4")
- Will need to strip about 1/2" of the jacket off the end of your speaker wire to terminate
D
David Y. The build quality is excellent, now my speakers can be closer to the wall! Love it.
M
Mark Ambrose Deadbolt Banana Plugs with Right Angle Connectors
D
Dan Skites Super easy to install. Hardest part was stripping the speaker wire. Now my speaker and amplifier connections are solid and don't come disconnected when moved.
R
Randall Sewall I have always wondered was there a quality speaker terminal end that would route my cables straight down my rack where all the heavy cable weight was not trying to break off the terminal ends. With the Right Angle ends cable weight is no longer putting extreme downward force causing the break off of my terminal ends.
P
Peter D I don't know who copied who, but these are just what I was looking for. Some years ago, I'd found a similar design on the leading online marketplace. But when I needed more, I found out that the manufacturer sells *only* on that marketplace, which I refuse to use any more due to their anti-consumer/anti-worker practices.
I tried a different design, from a different online seller that specializes in inexpensive cables, adapters, audio equipment and the like. But I found their design very hard to use; assembling the connector is painful (sharp knurling on the barrel digs into fingers) and tricky (the internal design doesn't include serrations to make space for the wire). I didn't like them very much at all.
These connectors from Sewell are *exactly* what I wanted (along with their other similar straight connectors). The barrel is easy on the fingers, and the internal connection fits together easily but securely. Bonus points for the connectors looking good, and for the 90-degree option, which has helped solve some issues with connections where there's not a lot of space or a wire sticking straight out of the wall would be vulnerable to damage or just not look very good.
Next time I need more banana plugs, I'm coming straight back here.