Description
Clean home theater setups (especially setups with wall-mounted TVs) can require you to store your A/V in a remote place like a closet or another room. Since your IR remote controls require line-of-sight to control your equipment, you won't be able to use them unless you can send the signal to your equipment with an extender.
This IR Receiver is used with any combination of different IR Emitters and connecting blocks. The receiver is mounted on or near your TV. If you're looking to expand your existing IR Extension setup then this is what you're looking for. If you're starting from square one, check out our complete IR Receiver Kits.
#wallplate
The IR Receiver Wall Plate connects via 4-conductor wire such as Cat5e/6 to a BlastIR Classic (Sold Separately)
#fisheye
The Fisheye IR Receiver is a "peephole" style IR receiver that can be installed on a wall or cabinet door for a clean and discreet setup. It is meant to be used with a BlastIR Pro.
Easy InstallInstalling this receiver should only take a few minutes. (Provided you have a 1/2" drill bit handy and your Drill's battery is charged). |
#keystone
Easy InstallThe Keystone IR Receiver connects via 3-conductor cable (Such as Cat5e/6). Once everything is installed, all that will be visible is the wall plate. |
![]() |
![]() |
Fits Standard Keystone Wall PlatesThe Keystone IR Receiver fits all standard rectangular NEMA keystones. Making it easy to seamlessly integrate it into an existing setup. (Wall plates sold separate) |
BlastIR ClassicWorks with BlastIR Classic. Simply terminate the corresponding wires to the Terminal block on the BlastIR Classic directly. No additional adapters needed. |
BlastIR Wireless ProWorks with BlastIR Wireless Pro. You will need a Phoenix adapter (Sold Separately) to connect the Keystone to the 3.5mm input on the BlastIR Wireless Pro. |
#all
Compatibility
Please note that IR Receivers are not universally compatible with all devices. Please consult the list below to check which of our products the IR Receiver is compatible with.
-
Classic: BlastIR Classic
- Keystone: BlastIR Classic
- Wall Plate: BlastIR Classic
- Fisheye: BlastIR Pro and Pro Multi-zone
- Pro: BlastIR Pro and Pro Multi-zone
#all
Troubleshooting
TroubleshootingThese steps can help you troubleshoot any IR equipment to determine any possible problems. |
Specifications
#Fisheye
Fisheye
- Designed to be inserted into a pre-drilled hole in a wall or cabinet
- Works with all brands of Audio/Video IR remote controls
- IR receiving distance: 18' - 30' (remote control dependent)
- Receiving frequencies: 34 - 60 kHz
- Dimensions: 50mm tube length, 11.75mm tube diameter, 15.7 head diameter
- 4.5ft cable
#Classic
Classic
- Designed to be surface mounted in multiple applications.
- Work with practically all brands of Audio/Video IR remote controls
- IR receiving: 18'~ 30'(remote control dependent)
- Operating Frequency: 38 & 56KHz
- Dimension: 45mm x 15mm x 12mm (receiver)
#pro
Pro
- Designed to be surface mounted in multiple applications.
- Works with all brands of Audio/Video IR remote controls
- IR receiving: 18' ~ 30' (remote control dependent)
- Receiving frequencies: 34 - 60 kHz
- Dimension: 20mm x 15mm x 13mm (receiver only)
- Includes adhesive tape for IR mounting
- 4 feet cable
- Tip - IR Signal
- Ring - 5V
- Sleeve - Gnd
#keystone
Keystone
- Receiver Frequency Range: 34 KHz to 60 KHz
- Transmit Frequency Range: 38 KHz to 56 KHz
- Range: 40ft @ 38 KHz, 25ft @ 56 KHz
- Power: DC 12V, 30 mA max
- Dimensions: 39.2L x 19.3W x 24.3H mm
#WallPlate
Wall Plate
- Designed to be surface mounted in multiple applications.
- Works with practically all brands of Audio/Video IR remote controls
- IR receiving: 18'~ 30'(remote control dependent)
- Operation Frequency: 38 & 56KHz
- Dimension: 114mm x 70mm x 18mm
- Power supply: 12VDC, 200mA