Sewell Light-Link USB 3.1 over Fiber Cable | 5Gbps, Zero Latency, 100ft
SKUSW-33184-100
Save up to 0%
Save 0%
Original price
$89.99
-
Original price
$99.99
Original price
$99.99
$99.99
$89.99
-
$99.99
Current price
$99.99
| /
Related Products: See Also:
The Light-Link is a USB 3.1 Gen 1 (formerly USB 3.0) Fiber Optic Cable. Because it uses fiber, it can send the signal instantly with no perceptible latency at much longer distances than regular USB extenders.
Note: This cable is compatible with devices that are USB 2.0 as well as USB 3.1 Gen 1 (Formerly USB 3.0), but it has to be plugged into a USB 3.1 Gen 1/USB 3.0 port in order to function! The supplemental power cable will be needed for USB devices that aren't low power.
How it works
The converters inside the cable heads convert incoming electrical signal into optical on one end, and back into electrical on the other end. The Light-Link is composed of two fiber cables and two copper cables. The copper cables are used for non-data information such as +5v power for USB devices. The fiber strands carry all the data information.
The light travels down the fibers using internal reflection, which allows the light to bounce off the cable walls similar to a bobsled. Light travels extremely fast (186,000 miles a second) so the signal arrives almost instantly without losing any quality.
Eliminates possible points of failure
In a typical long distance USB extension setup, you have many potential points of failure (source to sender, receiver to device, an RJ45 cable in between, and two power adapters for the baluns). The Light-Link extends the signal with zero latency and without having to worry about baluns or power adapters.
Optional Extra power
The Light-Link USB features a micro USB-B port to provide Auxiliary power for devices that require a little more power than usual. (Not required for most devices)
We use AirStick to hold .032" thick x 12" x 12" Copper sheet for machining coils.
It works great and can be reused up to 3 times before coolant contaminates
it and will no longer hold down the stock.
Had two banana deadbolts strip out threads to loose was able to use less wire stripted and tap it down and use awl on center then tighten slowly. They work great if you’re careful with install.
I used many different types of IT extenders (Commercial Applications) and always had issues with them until I found this one. It just works every time - zero issues even at 250'. It is my go to product when I need IR.
We use AirStick to hold .032" thick x 12" x 12" Copper sheet for machining coils.
It works great and can be reused up to 3 times before coolant contaminates
it and will no longer hold down the stock.
Sewell AirStick™ Microsuction Tape | Reusable Residue-Free Bond
Robert D Riggs Jr
IR Emmitter Rrview
Easy to install. Works perfectly. What else can you ask??
IR Emitter for BlastIR Systems – Dual-Band IR Blaster for Hidden AV Components
Ken Teague
Excellent Tool for IR
I used many different types of IT extenders (Commercial Applications) and always had issues with them until I found this one. It just works every time - zero issues even at 250'. It is my go to product when I need IR.
Sewell BlastIR-Link - Bi-Directional IR Extender Over Cat5e/6 (Up to 980 ft)
Mehul Patel
Love them
Love the Sewell deadbolt banana plugs. Easy to use
Sewell Deadbolt® Banana Plugs
Kimberly
Excellent!
I needed to rewire my stereo system in order to upgrade to a better speaker wire. I found these pins to be very useful in connecting to the clips on the back of two of my speakers and my receiver. They were easy to use and worked great! No more struggling to try to cram reluctant wire into the connections. The sound on my system is now awesome! Definitely recommend these plugs, they're very high quality!
Deadbolt Flex Pin Banana Plugs – Spring Terminal Connectors, 24k Gold, Up to 10 AWG Speaker Wire
