BlastIR In-Wall Emitter and Receiver Wall Plate Kit

In Stock


Open Box Items

Starting from: $34.55

"The entire process was perfect - good price, good quality, good service, quick delivery."

Overview

IR signal repeater SW-29310


Just because IR is line-of-sight doesn't mean that your equipment has to be! Overcome your remote's distance limitations and clean up your home theater setup with Sewell's elegant IR Emitter and Receiver Wall Plate Kit.

The Problem

Home theaters always come with a lot of equipment. While necessary, all of that equipment can turn your nice home theater into an eyesore. But if you want to clean up your setup by putting it all in a closet, your remote control won’t work anymore. That’s because remote controls work by using infrared (IR) signals, which can only work through line of sight.

The Solution

That’s why you need an IR extender, like the BlastIR Wall Plate Kit. This kit will provide all the parts you need to extend your IR signal to wherever you are hiding all of your equipment. That way you get the clean, professional look you want, but you are still able to use all of your remotes to control your home theater experience.


Ir Guide

How it Works

The BlastIR Wall Plate Kit uses cat5 or cat6 cabling to route your IR signal through the wall, directly where it needs to go. It can control up to 4 different devices and after installation all that you can see is a small wall plate.

The BlastIR Wall Plate Kit gives you an incredibly clean, professional look that is completely free of wires, and it’s easy to install. It also gives you a professional connecting block that can handle different kinds of installations and up to 6 dual-head emitters. That means you could potentially control up to twelve devices.

IR Extension Cable 6 ft. 3.5 mm Male to Female Extension Cable 12 ft. 3.5 mm Male to Female Extension Cable 25 ft. 3.5 mm Male to Female Extension Cable 40 ft. 3.5 mm Male to Female Extension Cable 50 ft. 3.5 mm Male to Female Extension Cable 100 ft. 3.5 mm Male to Female Extension Cable

Extend the length of your IR Repeater's "eyes" with a 3.5mm extension cable


Troubleshooting

If you're having troubles with your BlastIR, there are some simple things you can do to troubleshoot the problem. This video will walk you through the steps. Even though we use a BlastIR classic without the wall plate, the same techniques to check the IR signal apply. You can also check out this article about troubleshooting the BlastIR.


Specifications

Mfg. Part Number

  • SW-29309

Brand

  • IR by Sewell

Please Note

  • This product is NOT compatible with the following models of the AT&T U-verse cable box:
  • Cisco Explorer 4642HDC, IPN 4320, IPN 330HD and the Motorola VIP series. There are other models of the U-verse that are also likely incompatible with the BlastIR.

In-Wall IR Connecting Block

  • Provides one IR receiver input and six IR emitter outputs
  • Works with practically all brands of Audio/Video IR remote controls
  • 12VDC status input jack and LED indicator
  • Interface:3.5mm mini plug (for receiver and emitters);
  • Terminal block (for CAT5)
  • Power supply: 12VDC, 200mA
  • Dimensions: 82 W x 60 H 27 D mm

In-Wall IR Receiver Wall Plate

  • Designed to be surface mounted for multiple applications.
  • Works with practically all brands of Audio/Video IR remote controls
  • IR receiving: 18' - 30' (remote control dependent)
  • Frequency range: 34 - 60 kHz
  • Dimension: 114mm x 70mm x 18mm
  • Power supply: 12VDC, 200mA

Single IR Emitter

  • Designed to be surface mounted for multiple applications.
  • Works with practically all brands of Audio/Video IR remote controls
  • Operation Frequency: 38 - 56KHz
  • Interface: 3.5mm mini plug
  • Cable length: 9 feet
  • Includes adhesive tape for IR mounting

Dual IR Emitter

  • Designed to be surface mounted for multiple applications.
  • Works with practically all brands of Audio/Video IR remote controls
  • Operation Frequency: 38 - 56KHz
  • Interface: 3.5mm mini plug
  • Cable length: 9 feet
  • Includes adhesive tape for IR mounting.

Package Contents

  • 1 - In-Wall IR Connecting Block
  • 1 - In-Wall IR Receiver Wall Plate
  • 2 - Dual IR Emitters
  • 1 - Power Supply

Package Contents

  • 1 - In-Wall IR Connecting Block
  • 1 - In-Wall Receiver Wall Plate
  • 2 - Dual IR Emitters
  • 1 - Power Supply

Reviews

17 Total Reviews -

See all reviews
(14) 82.4 %
(2) 11.8 %
(0) 0.0 %
(0) 0.0 %
(1) 5.9 %

Not Rated

(0) 0.0 %

Have experience with this product?


Most helpful reviews

Great product!

grabijam - 8/29/2012 1:22:04 PM

3 found this review helpful


Pros: Fast delivery! Easy to install, reliable signal, works every time. Kit has everything you need except for two pair cable. I used CAT5.

Cons:

Other:

Was this review helpful?

Anonymous - 3/5/2014 9:57:14 AM

2 found this review helpful


Pros: Thank you for your support and instructions

Cons:

Other:

Was this review helpful?

Excellent Product

Chris - 1/30/2014 7:35:40 PM

1 found this review helpful


Pros: Excellent product Easy to Install Fast Shipping

Cons: None

Other:

Was this review helpful?

See all reviews

Most recent reviews

Thanks Swell

- 3/27/2017 6:42:24 PM

IR activity LED, works with other targets, works over long run of CAT 5, price

Was this review helpful?

Works great

Trevor - 1/31/2017 1:22:47 PM

Looks clean, works great

Was this review helpful?

Works great

Jim19130 - 7/14/2016 11:43:47 AM

Works great with my two remotes.

Was this review helpful?

Excellent product

Halsafar - 3/14/2016 8:17:34 PM

It worked right out of the box with my Motorola DCX3400-M PVR and a Yamaha receiver. Very easy installation.

Was this review helpful?

Not so great

Pro AV Guy - 1/15/2016 4:38:45 PM

Cheap.

Was this review helpful?

Questions

Currently no questions are available

Ask us a new question about:
BlastIR In-Wall Emitter and Receiver Wall Plate Kit

Downloads

Documentation Download

Manual - User Manual