Skip to content

Ghost Wire 2.0, Super Flat Adhesive Wire, 16 AWG (2 conductor) or 18 AWG (4 conductor), White

$29.95
SKU SW-32985-25
Conductors
Length

Related Products:
See Also:

Description

Make speaker wires disappear right on the wall or under the carpet with Sewell Adhesive Speaker Wire. This super-flat speaker wire can be used on almost any flat surface.

Perfect for running stereo signals across rooms, around corners, in automobiles, under flooring, or any situation where wires cannot be run through walls.

White backing allows wires to be simply attached and left uncovered, or it can be easily covered with paint, spackle, or flooring making the wire virtually invisible.

For an even cleaner install, we recommend using the Ghost Wire Terminal Block to connect the Ghost Wire to your regular speaker wire.

 

How to Terminate Ghost Wire

  1. Peel back the white backing about 1” and cut it off, exposing the adhesive and conductors.
  2. Trim away white covering in between and at the edges of the conductors.
  3. Remove the white covering from the opposite side of the conductor. It does not have adhesive between the conductor, and should leave a nice clean copper surface when removed.
  4. Fold the conductors 2-4 times, keeping the clean copper surface outwards.
  5. Insert the conductors into the Terminal Block and tighten the set screws.
  6. Insert your standard speaker cable in the other end of the terminal block and tighten the set screw.

How to Remove Bubbles from Ghost Wire

  1. Install the ghost wire onto a clean surface, pulling it tight as you do.
  2. Use a heat gun on low or hair dryer on high to heat the area where bubbles appear
  3. Smooth out the bubbles by rubbing back and forth over them. Use a glove if the heat is uncomfortable.

Running Ghost Wire Around Corners

We’ve had a lot of people ask us how to 90° turns when running it along the floor.

Here’s how:

  1. Run the cable along the edge of the wall with the adhesive side facing down
  2. Fold the cable back so the copper strips are facing up
  3. Fold the cable back down at a 45° angle, making a 90° turn

Specifications

Mfg. Part Number

  • SW-32985-25 25 ft. 2 Conductor 
  • SW-32985-50 50 ft. 2 Conductor 
  • SW-32985-100 100 ft. 2 Conductor
  • SW-32986-25 25 ft. 4 Conductor 
  • SW-32986-50 50 ft. 4 Conductor 
  • SW-32986-100 100 ft. 4 Conductor

Brand

  • Ghost Wire™ by Sewell

Specifications

  • .375" Width (each conductor)
  • .5 mm thick (includes peel back layer, adhesive, and conductors)
  • 16 AWG (2 conductor) 
  • 18 AWG (4 conductor)
  • Pure Copper
  • 2 Conductor or 4 Conductor 
  • White Jacket
  • Rated up to 10 Amps
  • Indoor Use

Applications

  • Home Theater Surround Sound Speaker Wiring
  • Low Voltage Stage Lighting
  • 12 Volt Cabinet Lighting
  • Security Access Control Wiring

Customer Reviews

Based on 29 reviews
72%
(21)
17%
(5)
7%
(2)
0%
(0)
3%
(1)
S
Scott Daley
Unusual Use!

I had need for stacked flat conductors to be used as elements in a phased-array emitter for an RF project. Worked great!

M
Marc Conway
Great product!!!

I used the ghost tape to go across a room before I tiled the floor. (For my surround sound speakers.)...It worked perfect. I’m so glad that this product exists.

E
Eric Barnes
Great!!

I was skeptical at first but it worked out well. Once I laid out the wire, stuck the wire to the wall and painted over it, I was impressed. The wire blends into the wall once it was painted and the sound was great out of my 500 Watt Sony Home Theater. I'm only giving it four stars for the adhesive. My wall was already painted so the wire kept falling off when I stuck the wire to the wall. When I added extra adhesive (silicone glue) to the wire, it stuck on perfectly. I believe that the adhesive on the wire would work perfectly, by itself, on newly installed dry wall. Other than that, yes I would recommend and buy this product again.

D
Darin
Pretty good product, will use again.

It doesn't lay QUITE as flat as I would have hoped, and the adhesive is a bit tough to work with. But in a pinch this is a great problem solver. I powered a picture frame display using this product, and it worked out nicely. May use it for surround speakers someday too.

J
Jeremy Cooley
Amazing

This stuff is seriously amazing. It's so flat you don't enough notice it when you walk on it on bare floor, and it completely disappears under a rug. I used wood stain to hide what little part of it was visible past the rug and, unless you're actively looking for it, you can't even see it.

Great product, great sound quality!

Customer Reviews

Based on 29 reviews
72%
(21)
17%
(5)
7%
(2)
0%
(0)
3%
(1)
S
Scott Daley
Unusual Use!

I had need for stacked flat conductors to be used as elements in a phased-array emitter for an RF project. Worked great!

M
Marc Conway
Great product!!!

I used the ghost tape to go across a room before I tiled the floor. (For my surround sound speakers.)...It worked perfect. I’m so glad that this product exists.

E
Eric Barnes
Great!!

I was skeptical at first but it worked out well. Once I laid out the wire, stuck the wire to the wall and painted over it, I was impressed. The wire blends into the wall once it was painted and the sound was great out of my 500 Watt Sony Home Theater. I'm only giving it four stars for the adhesive. My wall was already painted so the wire kept falling off when I stuck the wire to the wall. When I added extra adhesive (silicone glue) to the wire, it stuck on perfectly. I believe that the adhesive on the wire would work perfectly, by itself, on newly installed dry wall. Other than that, yes I would recommend and buy this product again.

D
Darin
Pretty good product, will use again.

It doesn't lay QUITE as flat as I would have hoped, and the adhesive is a bit tough to work with. But in a pinch this is a great problem solver. I powered a picture frame display using this product, and it worked out nicely. May use it for surround speakers someday too.

J
Jeremy Cooley
Amazing

This stuff is seriously amazing. It's so flat you don't enough notice it when you walk on it on bare floor, and it completely disappears under a rug. I used wood stain to hide what little part of it was visible past the rug and, unless you're actively looking for it, you can't even see it.

Great product, great sound quality!

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods