Sewell Ghost Wire can be used on almost any flat surface. Perfect for running stereo signals across rooms, around corners, in automobiles, under flooring, or any situation where wires cannot be run through walls.
These terminal blocks are designed specifically for use with Ghost Wire (Sold Separately).
How to Terminate Ghost Wire
Peel back the white backing about 1” and cut it off, exposing the adhesive and conductors.
Trim away white covering in between and at the edges of the conductors.
Remove the white covering from the opposite side of the conductor. It does not have adhesive between the conductor, and should leave a nice clean copper surface when removed.
Fold the conductors 2-4 times, keeping the clean copper surface outwards.
Insert the conductors into theTerminal Blockand tighten the set screws.
Insert your standard speaker cable in the other end of the terminal block and tighten the set screw.
Specifications
Mfg. Part Number
SW-29982-4 4 pc. 2 Conductor Terminal Block
SW-29982-8 8 pc. 2 Conductor Terminal Block
Brand
Ghost Wire™ by Sewell
Specifications
Terminal Block
Made for Sewell 2 Conductor Ghost Wire
Converts flat speaker wire to regular speaker wire
We use AirStick to hold .032" thick x 12" x 12" Copper sheet for machining coils.
It works great and can be reused up to 3 times before coolant contaminates
it and will no longer hold down the stock.
Had two banana deadbolts strip out threads to loose was able to use less wire stripted and tap it down and use awl on center then tighten slowly. They work great if you’re careful with install.
I used many different types of IT extenders (Commercial Applications) and always had issues with them until I found this one. It just works every time - zero issues even at 250'. It is my go to product when I need IR.
We use AirStick to hold .032" thick x 12" x 12" Copper sheet for machining coils.
It works great and can be reused up to 3 times before coolant contaminates
it and will no longer hold down the stock.
Sewell AirStick™ Microsuction Tape | Reusable Residue-Free Bond
Robert D Riggs Jr
IR Emmitter Rrview
Easy to install. Works perfectly. What else can you ask??
IR Emitter for BlastIR Systems – Dual-Band IR Blaster for Hidden AV Components
Ken Teague
Excellent Tool for IR
I used many different types of IT extenders (Commercial Applications) and always had issues with them until I found this one. It just works every time - zero issues even at 250'. It is my go to product when I need IR.
Sewell BlastIR-Link - Bi-Directional IR Extender Over Cat5e/6 (Up to 980 ft)
Mehul Patel
Love them
Love the Sewell deadbolt banana plugs. Easy to use
Sewell Deadbolt® Banana Plugs
Kimberly
Excellent!
I needed to rewire my stereo system in order to upgrade to a better speaker wire. I found these pins to be very useful in connecting to the clips on the back of two of my speakers and my receiver. They were easy to use and worked great! No more struggling to try to cram reluctant wire into the connections. The sound on my system is now awesome! Definitely recommend these plugs, they're very high quality!
Deadbolt Flex Pin Banana Plugs – Spring Terminal Connectors, 24k Gold, Up to 10 AWG Speaker Wire
