The VLDT-XL2DT Dante ® 2CH XLR Input Adapter is an audio transmitter based on the Dante ® Ultimo 2x2 solution. It converts two-channel balanced/unbalanced XLR analog audio into Dante ® 2CH digital audio, then transmits the audio to the receiving end through network (Dante ®). Analog audio input supports 5-level sensitivity adjustments. The adapter supports local USB-C port power supply as well as PoE function.
Featured Highlights
-
Two-channel XLR analog audio to Dante ® 2CH digital audio
-
Dante ® audio sampling rate supports 44.1/48/88.2/96KHz@24bit
-
Dante ® audio delay supports 1/2/5ms (configurable)
-
Analog audio input supports 5-level sensitivity adjustment (+24dBu, +4dBu, 0dBu, 0dBv, -10dBv)
-
Supports local USB-C port power supply and PoE function (Class 0 802.3af PoE)
-
Compact design for easy and flexible installation
Specifications
| Technical | |
|---|---|
| Audio Formats | LPCM 2.0 |
| Frequency Response | 20Hz to 20kHz (-/+0dB) |
| Dynamic Range | >130dB, 1kHzA-weighted |
| Audio S/N Ratio | >130dB, 1kHzA-weighted |
| Audio THD+N | < 0.01% at +4dBu, 1KHz |
| Audio Output Sync Delay | <10ms |
| Audio Latency | Configurable Dante® device latency (Supports 1, 2 or 5ms configurable using Dante ®Controller) |
| Connection | |
| Input Ports | 2x CH1/CH2 XLR IN [XLR female plug, with 30cm cable] 1x POWER [USB-C power and firmware update port, 12-pin female |
| Output Ports | 1x DANTE [RJ45 connector, Digital audio in/out, PoE] |
| Control Ports | 1x POWER [USB-C power and firmware update port, 12-pin female] 1x RESET button [System reboot button] 1x USB-C LED [Green color, USB 5V indicator] |
| Mechanical | |
| Housing | Plastic Enclosure |
| Color | Black |
| Dimensions | 115mm [L] × 40mm [W] × 28mm [H] |
| Weight | 0.09g |
| Power Supply Voltage | 5V |
| Power Supply Current Draw | 2W |
| Operating Temperature | 0°C ~ 40°C / 32°F ~ 104°F |
| Storage Temperature | -20°C ~ 60°C / -4°F ~ 140°F |
| Relative Humidity | 20 - 80% RH (relative humidity, non-condensing) |
| ESD Protection | IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge) |
