Kvaser U100 Single-Channel CAN/CAN FD to USB interface
SKUSW-33158
Save 0%
Save 0%
Original price
$535.98
-
Original price
$535.98
Original price
$535.98
$535.98
$535.98
-
$535.98
Current price
$535.98
| /
Related Products: See Also:
The Kvaser U100 is a robust, single-channel CAN/CAN FD to USB interface with reinforced galvanic isolation that squarely addresses the needs of the evolving automotive development market. Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet, this is the first in a new range of interfaces that is also suited to rugged applications in marine, industrial, heavy duty vehicle and heavy industries.
With enhanced protection of its own electrical circuits, a vibration, shock and drop-proof housing and high-quality cabling, the Kvaser U100 establishes a new reference in CAN interface design. At the same time, the U100 promises to drive down cost of ownership, whilst providing additional revenue opportunities for partners.
Major Features
Supports CAN FD, up to 8 Mbit/s (with correct physical layer implementation).
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
Powered through the USB connector.
Supports bit rates from 10 Kbit/sec up to 1 Mbit/sec.
Lightweight, glass fibre reinforced polyamide housing, overmolded with TPE.
IP67 rated.
DB-9 connector (other connectors available soon).
Intelligent LED UI.
Reinforced galvanic isolation, design validated with 5000 VAC rms applied for 60 seconds.
Industrial grade temperature range, −40 °C to +85 °C.
20000 msg/s, each timestamped with a resolution of 100 μs.
Support for SocketCAN.
Compatible with J1939, CANopen, NMEA 2000® and DeviceNet.
Fully compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib.
We use AirStick to hold .032" thick x 12" x 12" Copper sheet for machining coils.
It works great and can be reused up to 3 times before coolant contaminates
it and will no longer hold down the stock.
Had two banana deadbolts strip out threads to loose was able to use less wire stripted and tap it down and use awl on center then tighten slowly. They work great if you’re careful with install.
I used many different types of IT extenders (Commercial Applications) and always had issues with them until I found this one. It just works every time - zero issues even at 250'. It is my go to product when I need IR.
We use AirStick to hold .032" thick x 12" x 12" Copper sheet for machining coils.
It works great and can be reused up to 3 times before coolant contaminates
it and will no longer hold down the stock.
Sewell AirStick™ Microsuction Tape | Reusable Residue-Free Bond
Robert D Riggs Jr
IR Emmitter Rrview
Easy to install. Works perfectly. What else can you ask??
IR Emitter for BlastIR Systems – Dual-Band IR Blaster for Hidden AV Components
Ken Teague
Excellent Tool for IR
I used many different types of IT extenders (Commercial Applications) and always had issues with them until I found this one. It just works every time - zero issues even at 250'. It is my go to product when I need IR.
Sewell BlastIR-Link - Bi-Directional IR Extender Over Cat5e/6 (Up to 980 ft)
Mehul Patel
Love them
Love the Sewell deadbolt banana plugs. Easy to use
Sewell Deadbolt® Banana Plugs
Kimberly
Excellent!
I needed to rewire my stereo system in order to upgrade to a better speaker wire. I found these pins to be very useful in connecting to the clips on the back of two of my speakers and my receiver. They were easy to use and worked great! No more struggling to try to cram reluctant wire into the connections. The sound on my system is now awesome! Definitely recommend these plugs, they're very high quality!
Deadbolt Flex Pin Banana Plugs – Spring Terminal Connectors, 24k Gold, Up to 10 AWG Speaker Wire
