The Sewell HD-Link HL30 HDMI extender extends a high-quality HDMI video signal, up
to 4K@60Hz 4:4:4 HDR, over a single Cat6/Cat5e cable run of up to 70m (230 feet). It is
ideal for point-to-point applications requiring high quality video. It also extends the IR
signal of your remote to easily control your source device
Features
Supports resolutions up to 4K@60Hz YUV 4:4:4
* Supports HDCP 2.2 and HDCP 1.4
* Supports High Dynamic Range (HDR) video
* Supports EDID and HDCP passthrough
* Supports data transfer rates up to 6.0Gbps per channel (18Gbps all channels)
* TMDS clock can be up to 600MHz
* Supports 12bit per channel (36bit all channels) deep color
* Supports uncompressed audio such as LPCM
* Supports compressed audio such as DTS, Dolby Digital
* Only one unit needs to be plugged into power and the other unit will receive power over the
ethernet cable using Power over Ethernet
Specifications
Input Ports: HDMI x 1, RJ45 x 1, 3.5MM x 1
Output Ports: HDMI x 1, RJ45 x 1, 3.5MM x 1
Max Extension Distance: 70m (230 feet) for 4K@60Hz 4:4:4
Vertical Frequency Range: 50/60Hz
IR Frequency Range: 20-60KHz
Interlaced Resolutions: (50&60Hz) 480i,576i,1080i
Progressive Resolutions: (50&60Hz) 480p,576p,720p,1080p,4K@60Hz
Limited Warranty: 1 Year Parts and Labor
Operating Temperature: 32°F to 122°F (0 to 50 )°C°C
Storage Humidity: 5% to 90% RH non-condensation
Power Supply: DC 12V 1.0A
Power Consumption (Max): Sender: 1.3W, Receiver: 1.6W
Extender Unit Certifications: FCC, CE, RoHS
Power Supply Certifications: FCC, CE, RoHS
Dimensions: (LxWxH) 2.98 x 2.21 x 0.89 in (75.7 x 56 x 22.6 mm)
Net Weight: Sender/Receiver: 2.75 oz (78 g)
Output Ports: HDMI x 1, RJ45 x 1, 3.5MM x 1
Max Extension Distance: 70m (230 feet) for 4K@60Hz 4:4:4
Vertical Frequency Range: 50/60Hz
IR Frequency Range: 20-60KHz
Interlaced Resolutions: (50&60Hz) 480i,576i,1080i
Progressive Resolutions: (50&60Hz) 480p,576p,720p,1080p,4K@60Hz
Limited Warranty: 1 Year Parts and Labor
Operating Temperature: 32°F to 122°F (0 to 50 )°C°C
Storage Humidity: 5% to 90% RH non-condensation
Power Supply: DC 12V 1.0A
Power Consumption (Max): Sender: 1.3W, Receiver: 1.6W
Extender Unit Certifications: FCC, CE, RoHS
Power Supply Certifications: FCC, CE, RoHS
Dimensions: (LxWxH) 2.98 x 2.21 x 0.89 in (75.7 x 56 x 22.6 mm)
Net Weight: Sender/Receiver: 2.75 oz (78 g)
Troubleshooting
For customer support, email us at service@sewelldirect.com
Link LEDs are not lit / Units not receiving power? The power supply might not be fully seated and there is small chance of a faulty power port or adapter.
Check that the power is fully seated. Try the power supply in the other unit. Try a different power outlet.
No Sound / Sound not as expected? Potential causes: the output audio format may be unsupported by your display; your HDMI connection may be loose; the audio output may be set to a source other than HDMI.
Unplug and re-plug your HDMI cables to make sure they are fully seated. check that the output audio format of your source device supported by your display. Check that your source is outputting the sound through the HDMI cable; tis is an especially common problem on Windows or Apple PCs which have several different audio outputs that can be selected.
No picture or flickering picture? Potential cause: HDMI connection may be loose; HDMI cable specification is lower than needed; Ethernet cable is loose, Ethernet cable specification is lower than needed for the distance you are attempting.
Unplug and re-plug your HDMI and ethernet cables to make sure that they are fully seated. Try a different HDMI cable or ethernet cable that meets the required specifications. For 4K the HDMI cable should be HDMI 2.0 or higher. For best performance and maximum distance, the ethernet cable should be pure copper Cat6 (or higher) cable.
