Since IR remote control signals need "line-of-sight" to work, you will need this extender if the equipment you're trying to control is hidden out of sight such as in a cabinet or A/V Closet.
How This Works
This kit includes an IR receiver, a connecting block, and IR emitters. The IR receiver is a small device that you can mount on your HDTV's bezel or anywhere else in the room where you will want to point your remote. It is small and very easy to hide, but must be in line-of-sight to your couch (or wherever you will be sitting when using your remote control). This IR receiver receives your remote control's commands and sends the signal to the connecting block.
The connecting block then actively repeats and sends the same signal through all IR emitters connected to the block. You can tape the emitters directly to your equipment or simply fix them to a nearby shelf or wall as long as they are pointing at your device.
Specifications
Please Note
- This product is NOT compatible with the following models of the AT&T U-verse cable box:
- Cisco Explorer 4642HDC, IPN 4320, IPN 330HD and the Motorola VIP series. As well as regional providers using the Cisco ISB7150. There are other models of the U-verse that are also likely incompatible with the BlastIR.
In-Wall IR Connecting Block
- Provides one IR receiver input and six IR emitter outputs
- Works with practically all brands of Audio/Video IR remote controls
- 12VDC status input jack and LED indicator
- Interface: 3.5mm mini plug (for receiver and emitters);
- Terminal block (for CAT5)
- Dimensions: 82 W x 60 H 27 D mm
- Weight: 110g (.25 lbs.)
Dual Band IR Receiver
- Designed to be surface mounted in multiple applications.
- Works with practically all brands of Audio/Video IR remote controls
- IR receiving: 18' - 30' (remote control dependent)
- Receiving frequencies: 34 - 60 kHz
- Dimension: 45mm x 15mm x 12mm (receiver only)
- Includes adhesive tape for IR mounting
- 6 foot cable
Dual IR Emitters
- Designed to be surface mounted in multiple applications.
- Works with practically all brands of Audio/Video IR remote controls
- Operating Frequency: 38 - 56KHz
- Interface: 3.5mm mini plug
- Cable length: 9 feet
- Includes adhesive tape for IR mounting
Package Contents
- 1 - In-Wall IR Connecting Block
- 4 - Dual IR Emitters
- 1 - Dual Band Surface Mini IR Receiver
- 1 - Power Supply
- 2 - Mounting Screws
Videos
Troubleshooting
If you're having troubles with your BlastIR, there are some simple things you can do to troubleshoot the problem. This video will walk you through the steps.
M
Michael Whitehead Not sure what to write, but I had a problem with the blaster and I called numerous times and nobody returned my phone call not even the salesman who sold me the blaster so the correspondence with the firm and communication is not above part. That’s all I could say, I’ll keep it short and sweet.
Michael
Az
C
CLAUDE R GANTER Good product. I had to adjust the orientation of the emitters because they were too powerful but same thing would happen with original remote. Then it is very reliable so far.
R
Rand Bardsley BlastIR Classic, IR Remote Control Extender Kit
M
M. Goulet works fantastic. low profile, discreet reciver.
A
Adam Kirst BlastIR Classic, IR Remote Control Extender Kit
