BlastIR In-Wall Emitter and Receiver Wall Plate Kit

$43.95
SKU SW-29309

Just because IR is line-of-sight doesn't mean that your equipment has to be! Overcome your remote's distance limitations and clean up your home theater setup with Sewell's elegant IR Emitter and Receiver Wall Plate Kit.

The Problem

Home theaters always come with a lot of equipment. While necessary, all of that equipment can turn your nice home theater into an eyesore. But if you want to clean up your setup by putting it all in a closet, your remote control won’t work anymore. That’s because remote controls work by using infrared (IR) signals, which can only work through line of sight.

The Solution

That’s why you need an IR extender, like the BlastIR Wall Plate Kit. This kit will provide all the parts you need to extend your IR signal to wherever you are hiding all of your equipment. That way you get the clean, professional look you want, but you are still able to use all of your remotes to control your home theater experience.


IR Guide

How it Works

The BlastIR Wall Plate Kit uses Cat5e/6 cabling to route your IR signal through the wall, directly where it needs to go. It can control up to 4 different devices and after installation all that you can see is a small wall plate.

The BlastIR Wall Plate Kit gives you an incredibly clean, professional look that is completely free of wires, and it’s easy to install. It also gives you a professional connecting block that can handle different kinds of installations and up to 6 dual-head emitters. That means you could potentially control up to twelve devices. If you would like to run the receiver via Cat5 cable we would recommend the <a href="{https://sewelldirect.com/35mm-audio-female-and-female-to-3-terminal-female-phoenix-adapter-2-piece-pack}">Phoenix Adapter,/a.

Specifications

Please Note

  • This product is NOT compatible with the following models of the AT&T U-verse cable box:
  • Cisco Explorer 4642HDC, IPN 4320, IPN 330HD and the Motorola VIP series. There are other models of the U-verse that are also likely incompatible with the BlastIR.

In-Wall IR Connecting Block

  • Provides one IR receiver input and six IR emitter outputs
  • Works with practically all brands of Audio/Video IR remote controls
  • 12VDC status input jack and LED indicator
  • Interface:3.5mm mini plug (for receiver and emitters);
  • Terminal block (for CAT5)
  • Power supply: 12VDC, 200mA
  • Dimensions: 82 W x 60 H 27 D mm

In-Wall IR Receiver Wall Plate

  • Designed to be surface mounted for multiple applications.
  • Works with practically all brands of Audio/Video IR remote controls
  • IR receiving: 18' - 30' (remote control dependent)
  • Frequency range: 34 - 60 kHz
  • Dimension: 114mm x 70mm x 18mm
  • Power supply: 12VDC, 200mA

Single IR Emitter

  • Designed to be surface mounted for multiple applications.
  • Works with practically all brands of Audio/Video IR remote controls
  • Operation Frequency: 38 - 56KHz
  • Interface: 3.5mm mini plug
  • Cable length: 9 feet
  • Includes adhesive tape for IR mounting

Dual IR Emitter

  • Designed to be surface mounted for multiple applications.
  • Works with practically all brands of Audio/Video IR remote controls
  • Operation Frequency: 38 - 56KHz
  • Interface: 3.5mm mini plug
  • Cable length: 9 feet
  • Includes adhesive tape for IR mounting.

Package Contents

  • 1 - In-Wall IR Connecting Block
  • 1 - In-Wall IR Receiver Wall Plate
  • 2 - Dual IR Emitters
  • 1 - Power Supply

      Videos

      Troubleshooting

      If you're having troubles with your BlastIR, there are some simple things you can do to troubleshoot the problem. This video will walk you through the steps. Even though we use a BlastIR classic without the wall plate, the same techniques to check the IR signal apply.

      Customer Reviews

      Based on 8 reviews
      75%
      (6)
      13%
      (1)
      0%
      (0)
      0%
      (0)
      13%
      (1)
      T
      T.D.

      Worked Great

      R
      R.B.
      Perfect solution for hidden electronic equipment

      I use the BlasterIR in every new home I build. Put your electronics anywhere you want and control them with any remote.

      A
      A.
      Part Number: SW-29309
      Works great

      Pros: Works GreatCons: Other:

      A
      A.
      Part Number: SW-29309
      Thanks Swell

      Pros: IR activity LED, works with other targets, works over long run of CAT 5, priceCons: Other: thanks Sewell for help with troubleshooting and quick replacement!

      T
      T.
      Part Number: SW-29309
      Works great

      Pros: Looks clean, works greatCons: Seems a little pricy for what it is. Although the quality is fine.Other: I thought at first that it had poor range, but then discovered that some remotes are more powerful then others. It does work with all my remotes.

      You recently viewed

      Clear recently viewed

      Net Orders Checkout

      Item Price Qty Total
      Subtotal $0.00
      Shipping
      Total

      Shipping Address

      Shipping Methods