Whether you're recording or performing on stage, a mix of quality and durability is exactly what you'll need. Complement your microphones with the Silverback Roar XLR cable. The Silverback Roar XLR Cable features gold contacts, bare copper conductors, and a rugged, yet flexible build provided by its braided nylon exterior and spring relief XLR connectors.
Quality
The Silverback Roar XLR Cable is built with gold contacts in the XLR connector and all conductors are made of copper for a crisp and reliable sound. Gold contacts erode much slower than silver or nickel so you can have a clean connection for a longer time.
Durability
When you go on stage or hop into the studio, you should be able to trust that your equipment will work and sound great the whole time you are performing. We built the Roar with a copper shielding inside of the jacket and a nylon braiding outside of the jacket for a strong but flexible cable. The XLR connectors are equipped with springs to defend any bending where the connector meets the jacket.
Get the most out of your audio recording or performing experience with the Silverback Roar XLR cable. After all, you deserve a cable that performs as well as you do.
The Sewell Direct Roar XLR mic cables are the highest quality. best built XLR cables I’ve ever seen. The quality is evident from the moment you hold them. All of the components are solid and they inspire confidence immediately.
K
Ken Carbonell
XLR Cable
These will work for their intended purpose as PA to Subwoofer lines.
We use AirStick to hold .032" thick x 12" x 12" Copper sheet for machining coils.
It works great and can be reused up to 3 times before coolant contaminates
it and will no longer hold down the stock.
Had two banana deadbolts strip out threads to loose was able to use less wire stripted and tap it down and use awl on center then tighten slowly. They work great if you’re careful with install.
I used many different types of IT extenders (Commercial Applications) and always had issues with them until I found this one. It just works every time - zero issues even at 250'. It is my go to product when I need IR.
We use AirStick to hold .032" thick x 12" x 12" Copper sheet for machining coils.
It works great and can be reused up to 3 times before coolant contaminates
it and will no longer hold down the stock.
Sewell AirStick™ Microsuction Tape | Reusable Residue-Free Bond
Robert D Riggs Jr
IR Emmitter Rrview
Easy to install. Works perfectly. What else can you ask??
IR Emitter for BlastIR Systems – Dual-Band IR Blaster for Hidden AV Components
Ken Teague
Excellent Tool for IR
I used many different types of IT extenders (Commercial Applications) and always had issues with them until I found this one. It just works every time - zero issues even at 250'. It is my go to product when I need IR.
Sewell BlastIR-Link - Bi-Directional IR Extender Over Cat5e/6 (Up to 980 ft)
Mehul Patel
Love them
Love the Sewell deadbolt banana plugs. Easy to use
Sewell Deadbolt® Banana Plugs
Kimberly
Excellent!
I needed to rewire my stereo system in order to upgrade to a better speaker wire. I found these pins to be very useful in connecting to the clips on the back of two of my speakers and my receiver. They were easy to use and worked great! No more struggling to try to cram reluctant wire into the connections. The sound on my system is now awesome! Definitely recommend these plugs, they're very high quality!
Deadbolt Flex Pin Banana Plugs – Spring Terminal Connectors, 24k Gold, Up to 10 AWG Speaker Wire
