Kvaser Memorator R SemiPro, USB to CAN Bus Interface and Data Logger
SKUSW-29893
Sold out
Original price
$2,104.95
-
Original price
$2,104.95
Original price
$2,104.95
$2,104.95
$2,104.95
-
$2,104.95
Current price
$2,104.95
| /
Related Products: See Also:
Kvaser Memorator R SemiPro is an advanced, rugged, two channel CAN (controller area network) to USB interface and standalone data logger - two products in one! To ruggedize the design, Kvaser has soldered the SD card to the PCB to make sure it works error free even when exposed to vibration and shocks. Galvanic isolation and an aluminium housing complete the package.
In standalone mode, this device logs data to an SD card, whilst in interface mode, it connects the CAN bus to the PC via USB. Connect this datalogger to a PC to configure baud rates, trigger conditions and filters using the Kvaser Memorator Tools software, included.
Major Features
One device for desktop and laptop, combining a standalone CAN bus data logger and a USB CAN bus interface.
Quick and easy plug-and-play installation.
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B) identifiers.
CAN messages are time-stamped with 2 microseconds resolution.
Large on-board RAM buffer for CAN messages.
Two high-speed CAN channels (compliant with ISO 11898-2), 10kbit/s up to 1 Mbit/s.
Galvanic isolation to protect the hardware.
Power from CAN bus or from the USB side.
Built-in real time (calendar) clock with battery backup.
Logger status is indicated with five externally visible LEDs.
Driver support for major operating systems.
Support for Kvaser Linx J1587.
IP65 rated lightweight aluminium housing protects against dust and moisture.
Specifications
Mfg. Part Number
73-30130-00490-0
Technical Specifications
Bitrate: 10-1000 kbps
Buffers: Auto RX Buffers, Auto TX Buffers, On Board Buffer
We use AirStick to hold .032" thick x 12" x 12" Copper sheet for machining coils.
It works great and can be reused up to 3 times before coolant contaminates
it and will no longer hold down the stock.
Had two banana deadbolts strip out threads to loose was able to use less wire stripted and tap it down and use awl on center then tighten slowly. They work great if you’re careful with install.
I used many different types of IT extenders (Commercial Applications) and always had issues with them until I found this one. It just works every time - zero issues even at 250'. It is my go to product when I need IR.
We use AirStick to hold .032" thick x 12" x 12" Copper sheet for machining coils.
It works great and can be reused up to 3 times before coolant contaminates
it and will no longer hold down the stock.
Sewell AirStick™ Microsuction Tape | Reusable Residue-Free Bond
Robert D Riggs Jr
IR Emmitter Rrview
Easy to install. Works perfectly. What else can you ask??
IR Emitter for BlastIR Systems – Dual-Band IR Blaster for Hidden AV Components
Ken Teague
Excellent Tool for IR
I used many different types of IT extenders (Commercial Applications) and always had issues with them until I found this one. It just works every time - zero issues even at 250'. It is my go to product when I need IR.
Sewell BlastIR-Link - Bi-Directional IR Extender Over Cat5e/6 (Up to 980 ft)
Mehul Patel
Love them
Love the Sewell deadbolt banana plugs. Easy to use
Sewell Deadbolt® Banana Plugs
Kimberly
Excellent!
I needed to rewire my stereo system in order to upgrade to a better speaker wire. I found these pins to be very useful in connecting to the clips on the back of two of my speakers and my receiver. They were easy to use and worked great! No more struggling to try to cram reluctant wire into the connections. The sound on my system is now awesome! Definitely recommend these plugs, they're very high quality!
Deadbolt Flex Pin Banana Plugs – Spring Terminal Connectors, 24k Gold, Up to 10 AWG Speaker Wire
