Kvaser's high performing Leaf Light HS controller-area network (CAN Bus)
USB controller is trusted worldwide to perform up to 8000 messages per second, each time-stamped with 100 microsecond accuracy.
CAN Bus Application Support
The Kvaser Leaf Light HS USB to CAN bus controller interface supports a number of CAN applications such as:
AFT MARC I™
ATI CANLab™ Network Analysis
ATI VISION™ Calibration and Data Acquisition
Ficosa CANica™
Influx Module Analyzer™
Kvaser CanKing™
National Instruments DIAdem™
National Instruments LabView™
Port CANopen Configuration™
PPE PCMSCAN™
TKE CANtrace™
TKE CANopen Configuration™
VAT 2000™
Warwick X-Analyser™
Xtm
Kvaser Leaf Light HS is Feature Rich
Kvaser's long understanding of your needs for comprehensive and accurate USB to CAN connectivity and data aquisition shows in their Leaf Light HS converter. It can support both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers, supports data and remote frames, detects error frames, and performs EMC tasks exceptionally well.
Other Kvaser Leaf Light HS Versions:
Kvaser Leaf Light HS(the one featured on this product page)(Item No. 00241-8)
One channel USB-to-bus interface for High-Speed CAN (ISO 11898-2).
Handles a bit rate from 5 kbits/s up to 1 Mbits/s. Interfaces the CAN bus with 9 pin DSUB connectors. Pin assignment according to CiA-DS102
Kvaser Leaf Light HS with DSUB and Galvanic Isolation (Item No. 00411-5)
One channel USB-to-bus interface for High-Speed CAN (ISO 11898-2) with galvanically isolated CAN bus drivers.
Handles a bit rate from 5 kbits/s up to 1 Mbits/s.
Interfaces the CAN bus with 9 pin DSUB connectors. Pin assignment according to CiA-DS102
Kvaser Leaf Light HS (Item No. 00402-3)
One channel USB-to-bus interface for High-Speed CAN (ISO 11898-2).
Handles a bit rate from 5 kbits/s up to 1 Mbits/s. Interfaces the CAN bus with OBD2 connector
