These are also referred to as “Open-Screw Type” Banana Plugs. With these Banana Plugs you can easily connect your speaker wire into the side the Banana Plug, or through the bottom like normal a Banana Plug. These have many advantages in quick and simple projects as they can be terminated much more quickly, requiring no additional tools. Simply twist the bottom loose, stick the cable in, and tighten them down. Also great for situations with low clearance between the back of your receiver and your wall.

$32.95
(12 pairs)

The Pro Maestro Banana Plugs are more on the side of the traditional Banana Plug. These simply will connect through the bottom of the Banana Plugs. The speaker wire is then fastened inside by a single cable-screw. With the Pro Maestro’s heavy duty steel casing and tight cable-screw design, you can rest assure that you have a solid connection from your stereo to your speakers while eliminating the hassle and frustration of installing a home theater system.

$54.95
(20 pairs)

The Silverback Banana Plugs are very similar to the Pro Maestro as they use screws to tighten down and secure the speaker wire. However the Silverback’s will feature a dual cable-screw instead of the single screw that the Pro Maestros have. This will give you the most secure connection possible and over all best sound quality.

$30.95
(12 pairs)

Using self crimping teeth these plugs provide a simple, secure, and low profile connection without requiring soldering or screws. These 1.6” inch plugs are extremely low profile making it so you can put your speakers or receiver closer to the wall.

$24.95
(12 pairs)

The locking technology of the Sewell Harpoon banana plug expands the connector tip locking the plugs into you receiver or speakers. Unlike other banana plugs that use low quality metals like zinc alloy the Sewell Locking Banana plugs use high quality brass with 24k gold plating.

$28.95
(8 pairs)

The Dual Tip Banana Plugs are similar to the Open-Screw Type Banana plugs in the fact that you can install the speaker wire in the side of the back of the Banana Plug. These Banana Plugs can be an advantage over other Banana Plugs when you are installing adjacent Plugs, so instead of installing them individually you can prepare and install two of them at a time.

$25.95
(20 pack)

Spade Plugs are similar to normal Banana Plugs in the over-all installation of the speaker wire however if your setup requires a Spade Plug then you don’t have to be left out. These Spade plugs are made of Copper and feature a dual cable-screw for securing the speaker wire much like the Silverback Banana Plugs.

$34.95
(12 pair)

Speaker Wire with the Banana Plugs built-in are made for those who want Home Theater on Easy Mode. No need to cut and fiddle around with your own speaker wire. Simply plug the cables into the back of your Stereo and run them over to your speakers with no hassle. These cables are made with 12 Gauge pure copper wire giving the most crisp and clear audio without loss or distortion of the audio.

$8.95-$77.95
(3 ft. - 100 ft.)