The SW-22309 includes a 6 foot component cable, but if you need a longer one you can find it here-
If you have a component (YPbPr or Red, Green, Blue RCA interfaces) source that you need to display on a TV with a
composite input (typically yellow RCA) or S-Video, this converter is perfect for you. This converter also handles audio pass-through with dual RCA input on the component side and 3.5mm stereo output on the composite side.
Why The Conversion Box?
Component and composite/
s-video signals are two very different signals. With component, the video signal is divided into three different signals in order to theoretically transmit up to 3 times as much video information, making component capable of handling HD resolutions up to 1080p. Composite and S-Video (both the same signal) don't have high definition capabilities and handle all video over a single conductor.
This conversion box not only integrates the RGB component signal into the composite signal (something a simple cable can't do), and also downscales the signal to fit the resolution of your standard definition composite TV.
This converter also includes a PAL/NTSC switch (PAL for European/Asian (except Japan) users, NTSC for North American/Japanese users)
Above:
(1) LED Power Indicator
(2) Component (YPbPr) Ports (input)
(3) Left/Right Stereo Input
(4) Power Adapter (included) plugs here
(5) 3.5mm stereo audio output (3.5mm audio cable included)
(6) Composite (yellow RCA) output
(7) S-Video output
(8) S-Video/Composite switch
(9) NTSC/PAL switch (North America uses NTSC)
