Make installation a breeze with a complete kit. This kit comes with:
1x Pair of 8 inch In-Wall Speakers
1x Spool of Speaker Cable (16 AWG) 50ft
12x Pairs of Banana Plugs
1x 2 Speaker Wall Plate
1x Wire Stripper
When purchased as a kit, you save $20!
Sewell Pro Maestro In-Wall Speakers feature kevlar cones with rubber edges and highly defined sound for serious audiophiles and home theater enthusiasts, as well as high-end professional and commercial building use -- without the high price tag.Stay Away From Paper Cones: Go Kevlar
If you're hoping for professionally clear sound and also a long life span for your speakers you will want kevlar cones, not paper. Luckily, the cost of such materials have gone down and virtually any level of home theater enthusiast will get the best value with these speakers.
These 8" speakers feature an RMS (running power) of 80W and a maximum output of 160W. The impedance level is a standard 8 Ohms, and the speakers also feature a 25ΦSwivel Dome Tweeter and a 25Φ K.S.V voice coil.
Cross Over Switch is Built-in
Setting up a complex system complete with a subwoofer or multiple sizes of in-wall/in-ceiling speakers? If so you're in luck with these speakers. If you are sending more power to some speakers than these, there is a built-in switch that allows you to set a 'filter' (aka cross over) that will only allow sound up to a certain barrier to be reproduced.
This means, if you have a high powered sub and a medium powered speaker (like these) you will be able to send the same powered signal to all speakers without fear that the sound will distort with your medium powered speakers. This is a common fine tuning done with professional sound rooms in order to get the optimal crystal clear sound.
Also, when mounting speakers in walls and ceilings, it is difficult to predict how it will end up sounding. There is a huge difference in resonance when installed in a wall or box, and these switches give you another option for limiting output when desired. These speakers feature 0 db, -3 db, and -6 db filters.
Mfg. Part Number
- 1x Pair of Speakers
- 1x Spool of Speaker Cable (16 AWG) 50ft
- 12x Banana Plugs
- 1x 2 Speaker Wall Plate
- 1x Wire Stripper
- Magnet:30 Oz
- Kevlar Woven Cone Rubber Edge
- Voice Coll:35F K.S.V.
- 25FSwivel Dome Tweeter
- Built-in Crossover With switch of 0dB,-3dB,-6dB
- Impedance:8 Ohms
- Dimensions: 10" Wide x 14" Tall x 3 3/4" Deep
- Size: Standard single-gang wall plate
- Connectors: Accepts banana plugs and bare wire
- Conductor: Gold plated (prevents corrosion)
- Ports: 4 Binding Posts (for 2 speakers)
- 16/2: 16 AWG / 2 Conductor
- High Strand - 26 strands per wire
- Pure Copper Oxygen Free Conductors
- Dual PVC Jacket (One outer and one around each conductor)
- 24k Gold Connectors
- Heavy Duty Steel Outer Casing
Currently no reviews are available
Have experience with this product?