IR Receiver Cable for BlastIR Pro, Dual Band, RC-MM support

Sewell Part # SW-30458-R

$14.00
Free Shipping

3.8 (6 reviews)

In Stock

"The entire process was perfect - good price, good quality, good service, quick delivery."

Overview

The BlastIR Pro supports three receiver inputs. This IR receiver cable can be added to the product to let you control your devices from multiple locations.

Clean home theater set-ups (especially set-ups with wall-mounted HDTVs) that require you to store your video equipment (like Blu-Ray players, DVD players, TIVOs, etc.) in a remote place like a closet or another room. Since your remote controls rely on line-of-site to control your equipment (in other words, it can't go through walls, it must be pointed directly at your equipment if you aren't using an extender), you won't be able to use them unless you can send this signal (known as infrared or IR) to your equipment with a wired extender.

This IR Receiver can be used in tandem the BlastIR Pro IR Emitters and connecting blocks. If you’re looking to expand your already existing setup then this is what you’re looking for. If you’re starting from square one, check out our IR Reciever Kits.

Related Articles

Specifications

Mfg. Part Number

  • SW-30458-R

Brand

  • IR by Sewell

Specifications

  • Designed to be surface mounted in multiple applications.
  • Works with all brands of Audio/Video IR remote controls
  • IR receiving: 18' ~ 30' (remote control dependent)
  • Receiving frequencies: 34 - 60 kHz
  • Dimension: 20mm x 15mm x 13mm (receiver only)
  • Includes adhesive tape for IR mounting
  • 4 feet cable

Pinout

  • Tip - IR Signal
  • Ring - 5V
  • Sleeve - Gnd

Reviews

6 Total Reviews -

See all reviews
(3) 50.0 %
(1) 16.7 %
(1) 16.7 %
(0) 0.0 %
(1) 16.7 %

Not Rated

(0) 0.0 %

Have experience with this product?


Most helpful reviews

Blast IR Pro

- 4/2/2018 8:45:21 PM

1 found this review helpful


Pros: The Blast IR Pro is pretty straight forward and works well when only using one input. Can have several IR outputs without problem.

Cons: The unit has 3 IR inputs but my experience after working with 3 separate Blast IR pros is that the u it will only transfer the input signal to the IR outputs if there is one one IR input plugged in. I tried several times having more than 1 input plugged and and all three units failed to work when I had more than one IR input plugged in (and yes I tried several combinations of inputs - 1 and 2, 2 and 3, 1 and 3, 2 and 3....no two inputs could be plugged in at the same time)

Other:

Was this review helpful?

Miss leading info given

phillman5 - 3/22/2018 8:59:10 PM

0 found this review helpful


Pros:

Cons: Info on this device says "Works with all brands of Audio/Video IR remote controls". This is very misleading! Several AV receivers have a 3.5 mm Remote in jack in the back of the unit. They require a voltage of at least 5 V and a couple mA current (>50mW) to drive a LED. This device does not do that!

Other: I could recommend a unit to work with such AV recievers, but that probably wouldn't be right.

Was this review helpful?

Didn't work

- 3/17/2018 4:48:58 PM

0 found this review helpful


Pros:

Cons: plugged in out of box, and receiver was dead, no light or IR response

Other: Unit was dead on arrival. Tried several ports on BlastIR, but no response. Please send a replacement.

Was this review helpful?

See all reviews

Most recent reviews

Blast IR Pro

- 4/2/2018 8:45:21 PM

The Blast IR Pro is pretty straight forward and works well when only using one input. Can have several IR outputs without problem.

Was this review helpful?

Miss leading info given

phillman5 - 3/22/2018 8:59:10 PM

Was this review helpful?

Didn't work

- 3/17/2018 4:48:58 PM

Was this review helpful?

Works great

Dunster - 5/6/2017 5:52:25 PM

Item came promptly and works great.

Was this review helpful?

Works Great!

- 12/30/2016 8:36:25 PM

Receives IR signal, gives LED response to input

Was this review helpful?

Questions

Currently no questions are available

Ask us a new question about:
IR Receiver Cable for BlastIR Pro, Dual Band, RC-MM support