HD-Link HL24 Sender by Sewell

HDMI over any 2 conductive cables, 2 mi.

In Stock


Open Box Items

Starting from: $169.95

"Fast shipping, product as described. Will buy again..."

Overview

Note: This listing is for the Sender unit only. It is meant to be used with an HL24 Receiver. Useful if you already have an existing HL24 Sender and Receiver setup with extra receivers, and need to separate them into individual poin-to-point setups.

Extend an HDMI signal up to two miles with any conductive cable you might have. Pick a cable and it will work: Cat5e/6, speaker wire, coax, telephone wire, coat hangers, and even water. Perfect for installs with existing wiring or whenever running new cables is not an option.

Does it really reach two miles?

Yes it does, but with everything magical there's always a catch. A lot of processing is happening in each unit, resulting in some compression and significant latency. The latency is about half of a second, which makes a remote controller feel laggy. The compression quality is pretty good, but definitely noticable under close scrutiny.

This is a fantastic solution for digital signage, static images, or casual movie and TV viewing. For gaming or other applications that require frequent input, we recommend low-latency extenders such as the HD-Link HL15.

How This Works

This kit comes as a pair, with one sender unit and one receiver unit. Here's how to set it up:

  1. Connect the Sender to the Receiver unit with any two conductive wires.
  2. Connect the HDMI cables from the sender and receiver units to their respective display and source device.
  3. Optional: Connect the IR receiver cable to the receiver unit and the IR emitter to the sender unit to control the video source from the display location.
  4. Optional: Connect a local display to the Sender via HDMI cable.
  5. Plug in the included power supplies.


The HL24 Allows for multiple configurations such as Point-to-Point, Daisy Chain, or Multi-Wire. This would require additional Receivers which are available for purchase separately.

HDMI over any

HDMI over Water?

Derek says the HDMI over water video is just a gimmick, but it was fun testing all the different things this extender can send video through. But seriously, this will transmit HDMI over anything conductive. Even a burrito, we tried.

Don't take our word for it

See the HL24 in action on this video by Linus Tech Tips. Note that on their first example they were still able to get signal even though they were only using one cable. For best results we recommend using two separate conductors.

Specifications

Mfg. Part Number

  • SW-32974-TX

Brand

  • Link by Sewell

Specifications

  • 1080p @ 60Hz
  • H.264 compression
  • DC 12V
  • Up to 2 miles point to point extension
  • HDMI local output
  • IR transmission

Package Contents

  • 1 - HL24 Transmitter
  • 1 - IR Emitter
  • 1 - Power Supply

Reviews

3 Total Reviews -

See all reviews
(2) 66.7 %
(0) 0.0 %
(1) 33.3 %
(0) 0.0 %
(0) 0.0 %

Not Rated

(0) 0.0 %

Have experience with this product?


Most helpful reviews

For what it does it does a good job.

TechMedX - 2/28/2018 1:17:29 PM

2 found this review helpful


Pros: It can send actually transmit HDMI over any two wires with HDCP in tact. Signal was clear and no distortion. Testing cables were only a few feet long but it should work over any distance.

Cons: Audio and Video signal separate and the audio can become delayed to the point where the TV becomes unwatchable. Resetting the devices will get the signal aligned again, but it can become a frequent process.

Other: I give it 3 stars because what it is doing is complex and it does work. If you have no other choice to distribute HDMI to a TV this will work, however I would not recommend it do to the signal separation.

Was this review helpful?

Amazing

Jim - 12/1/2017 1:19:33 PM

0 found this review helpful


Pros: Using my laptop, I first tested with about 300 feet of coax, using the center conductor and the braided wire as the two connections, worked perfectly. Then I connected one terminal to a single strand off a cat6 cable, and the other terminal to the chain link fence in our parking lot. We watched flawless video/audio on the other end. The cat6 cable was about 100 feet, and about 150 feet of fence.

Cons:

Other:

Was this review helpful?

Impressive Product

Chris - 11/29/2017 11:27:26 AM

0 found this review helpful


Pros: Pretty impressive product. We were skeptical it would work, but we have it working just fine over a 1000’ spool of wire. Impressive.

Cons:

Other:

Was this review helpful?

See all reviews

Most recent reviews

For what it does it does a good job.

TechMedX - 2/28/2018 1:17:29 PM

It can send actually transmit HDMI over any two wires with HDCP in tact. Signal was clear and no distortion. Testing cables were only a few feet long but it should work over any distance.

Was this review helpful?

Amazing

Jim - 12/1/2017 1:19:33 PM

Using my laptop, I first tested with about 300 feet of coax, using the center conductor and the braided wire as the two connections, worked perfectly. Then I connected one terminal to a single strand off a cat6 cable, and the other terminal to the chain link fence in our parking lot. We watched flawless video/audio on the other end. The cat6 cable was about 100 feet, and about 150 feet of fence.

Was this review helpful?

Impressive Product

Chris - 11/29/2017 11:27:26 AM

Pretty impressive product. We were skeptical it would work, but we have it working just fine over a 1000’ spool of wire. Impressive.

Was this review helpful?

Questions

Currently no questions are available

Ask us a new question about:
HD-Link HL24 Sender by Sewell, HDMI over any 2 conductive cables, 2 mi.