Kvaser Memorator R SemiPro, USB to CAN Bus Interface and Data Logger
SKUSW-29893
Sold out
Original price
$2,104.95
-
Original price
$2,104.95
Original price
$2,104.95
$2,104.95
$2,104.95
-
$2,104.95
Current price
$2,104.95
| /
Related Products: See Also:
Kvaser Memorator R SemiPro is an advanced, rugged, two channel CAN (controller area network) to USB interface and standalone data logger - two products in one! To ruggedize the design, Kvaser has soldered the SD card to the PCB to make sure it works error free even when exposed to vibration and shocks. Galvanic isolation and an aluminium housing complete the package.
In standalone mode, this device logs data to an SD card, whilst in interface mode, it connects the CAN bus to the PC via USB. Connect this datalogger to a PC to configure baud rates, trigger conditions and filters using the Kvaser Memorator Tools software, included.
Major Features
One device for desktop and laptop, combining a standalone CAN bus data logger and a USB CAN bus interface.
Quick and easy plug-and-play installation.
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B) identifiers.
CAN messages are time-stamped with 2 microseconds resolution.
Large on-board RAM buffer for CAN messages.
Two high-speed CAN channels (compliant with ISO 11898-2), 10kbit/s up to 1 Mbit/s.
Galvanic isolation to protect the hardware.
Power from CAN bus or from the USB side.
Built-in real time (calendar) clock with battery backup.
Logger status is indicated with five externally visible LEDs.
Driver support for major operating systems.
Support for Kvaser Linx J1587.
IP65 rated lightweight aluminium housing protects against dust and moisture.
Specifications
Mfg. Part Number
73-30130-00490-0
Technical Specifications
Bitrate: 10-1000 kbps
Buffers: Auto RX Buffers, Auto TX Buffers, On Board Buffer
Liquid error (layout/theme line 461): Could not find asset snippets/quantity-breaks-now.liquid
Net Orders Checkout
Item
Price
Qty
Total
Subtotal
$0.00
Shipping
Total
Shipping Address
Shipping Methods
Victor Texeira
Awesome Banana Clips
I used 16 gauge speaker cable with these clips. 1/2” stripping of the wire is all that is needed. Then I twisted the bare wire so it was neat going into the clip. The screws clamped down nice and snug. Once that is done, I installed the cover and it fit into the speaker just fine. If you are looking to do a clean wiring config, these banana clips are for you!
Silverback Flex Pin Connectors, For Spring-Loaded Inputs
Geoff Couris
So nice!
I am generally a see touch feel kind of person, but sometimes you just can’t but sense that something is worthy. Man am I over the moon for these. These are even more substantial than I hoped. Pretty simple build with the #10 wire I matched with them.
Deadbolt Banana Plugs with Right Angle Connectors
Mickey Deagle
Works as expected (perfectly)
I installed this under a wall-mounted TV in order to adjust volume on my AVR, located in a nearby closet. There's a blue LED that lights up when it detects IR, which is a nice touch of tech. The setup looks clean and works perfectly.
Keystone IR Receiver
Dwight Henry
Feedback on speaker wire
Enthusiastic stereo performance consumer here, after being asked for Feedback! several times via email. The speakers I bought these wires to connect were a pair of Emotiva bookshelf's, and a pair of Polk towers. They sounded great and with the terminations of the wires being banana plugs, installation is as easy as plugging in a toaster. I am not an audiophile like my brother. He will talk about speaker wire at Thanksgiving dinner, during the part where we say what we are thankful for, interrupting Gramps mumbling through misaligned choppers about hunger in his youth.
Silverback Speaker Wire with Banana Plugs
roland cyr (m1.5tman)
Dead bolt banana plugs
I almost purchased these from a well known audio brand, but decided to give these a chance. I was not disappointed. They are well built and look nice. I highly recommend these banana plugs.
Does exactly what it says it does. The small sheet you can buy can be cut up and used for tons of small thing (vases, things you don’t want your cat to knock over, MagSafe chargers that you don’t want to move around, etc.
by far my favorite speaker wire ends, can't imagine any other style that offers the connection and secureness that these offer, I have the straight and 90 degree banana plugs and also the stranded wire style, all are amazing.
