{"title":"Extenders","description":"AV, Computer, IR, and other Extension Products","products":[{"product_id":"blastir-wireless-pro-ir-repeater","title":"Sewell BlastIR Wireless Pro IR Repeater – Long-Range Wireless IR Extender for Home Theater Control (Multi-Zone, 650 ft Range)","description":"\u003cdiv style=\"width: 100%; max-width: 1140px;\"\u003e\n\u003cp\u003eControl all of your home theater video sources (Blu-Ray player, Cable box, TiVo, and anything else that uses a standard IR remote control) from behind walls or closets by extending the IR signal with this kit.\u003c\/p\u003e\n\n\u003ch3\u003eHow this works\u003c\/h3\u003e\n\u003cp\u003eThis kit comes with an IR Receiver, and an IR Emitter. Simply point your remote control at the Receiver, and it will send the signal wirelessly to the Emitter which will then transmit that signal to the devices you wish to control.\u003c\/p\u003e\n\u003ccenter\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/OREO_o_c975c2ca-1732-437b-ae42-ba873546d4fd.jpg?v=1578094986\" alt=\"zone control\" style=\"width: 100%; max-width: 600px; float-left;\"\u003e\n\u003c\/center\u003e\n\u003ch3\u003eMulti-zone Control\u003c\/h3\u003e\n\u003cp\u003eThis kit can be combined with other BlastIR Wireless Kits to create custom setups.\u003c\/p\u003e\n\u003cp\u003eIt supports up to 10 \"zones\" with independent sending\/receiving frequencies. (kind of like different channels on a walkie-talkie). You can change the zone by using a very small rotating switch located at the bottom of the receiver and emitter pucks. The Receivers will only communicate with the Emitters that are set to the same zone.\u003c\/p\u003e\n\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/Separate_Zones_1.png?v=1580422574\" alt=\"Separate Zones\" style=\"width: 100%; max-width: 800px;\"\u003e\u003c\/center\u003e\n  \n\n\u003cdiv style=\"background:#f7f7f7; padding:35px;\"\u003e\n\u003cp\u003eThere are multiple ways to use the BlastIR Wireless PRO. Some setup examples are: One to one, All to All, One to Many, or Many to One. You can also purchase extra Emitters, or Receivers individually if you don't need an extra full pair.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ccenter\u003e\n\u003ch3\u003eOne to One\u003c\/h3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/One_to_One_2x-50_fd20727c-2a79-4666-9065-c975134d8302.jpg?v=1580427870\" alt=\"one to one\" style=\"width: 100%; max-width: 800px;\"\u003e\n  \u003c\/center\u003e\n\u003c\/div\u003e\n\u003ccenter\u003e\n\u003ch3\u003eAll to All\u003c\/h3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/All_To_All_2x-50.jpg?v=1580426034\" alt=\"all to all\" style=\"width: 100%; max-width: 800px;\"\u003e\n\u003c\/center\u003e\n\n\u003ccenter\u003e\n\u003ch3\u003eOne to Many\u003c\/h3\u003e\n\n\u003cimg alt=\"1 to many\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/1_to_Many_175db37b-8e51-456b-8cd5-e92f59c04285.png?v=1628904838\" style=\"width: 100%; max-width: 850px;\"\u003e\n\u003c\/center\u003e\n\n\u003ccenter\u003e\n\u003ch3\u003eMany to One\u003c\/h3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/IRvisualsDiagrams-_1.jpg?v=1580422328\" alt=\"many to one\" style=\"width: 100%; max-width: 800px;\"\u003e\n\u003c\/center\u003e\n  \n\n\n\u003ch3\u003eExtend Reach with IR Emitter and Receiver Cable (Optional)\u003c\/h3\u003e\n\u003cp\u003eYou can use the included Receiver and Emitter cables so further minimize what's seen on your setup. The emitter cable is a \"Dual-headed\" Emitter so it allows you to control an additional two devices. Magnetic Feet and Adhesive pads are also included to mount the BlastIR Wireless out of sight when using the IR Receiver and Emitter Cables.\u003c\/p\u003e\n\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/Use_with_IR_Emitters_2x-50.jpg?v=1580428367\" alt=\"use with IR emitters\" style=\"width: 100%; max-width: 800px;\"\u003e\u003c\/center\u003e\n\n\u003c\/div\u003e\n\u003ch4\u003eTroubleshooting\u003c\/h4\u003e\n\u003cp\u003eIf you already have a BlastIR Wireless PRO and need help setting it up, watch this video or check out the troubleshooting tips below. Also, feel free to call us at (800) 709-1345 and we'll help you set it up over the phone.\u003c\/p\u003e\n\n\u003cdiv style=\"width: 100%; max-width: 315px;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/sWlte8516pg?modestbranding=1;rel=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n  \n\u003cbr\u003e\n\u003cb\u003eIs it receiving power?\u003c\/b\u003e\n\u003cp\u003eMake sure the unit is plugged in completely and receiving power. Once the power cord is plugged in, the light should briefly turn blue when the device turns on, then turn blank, turning back on only when it receives a remote signal.\u003c\/p\u003e\n\u003cb\u003eAre the units too far apart?\u003c\/b\u003e\n\u003cp\u003eThe intended range between units is around 600 feet and should work around walls and through closed doorways, though the more obstacles there are, the more limited this range becomes.\u003c\/p\u003e\n\u003cb\u003eIs each device in the proper spot?\u003c\/b\u003e\n\u003cp\u003eThe receiver (blue-ringed device) should be next to the TV (or where you want to send the signal from). The emitter (orange-ringed device) should be next to the cable box or the device you want to control.\u003c\/p\u003e\n\u003cb\u003eAre you using the proper cord for each device?\u003c\/b\u003e\n\u003cp\u003eYou will want to make sure that the ring of color on the cord and device match in color.\u003c\/p\u003e\n\n\u003cb\u003eAre you receiving a signal?\u003c\/b\u003e\n\u003cp\u003eIf the device is not turning blue when you point the remote at it and press a button, it is not receiving a signal.\u003c\/p\u003e\n\u003cp\u003eHere are a few things to check:\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAre you pointing the remote at the receiver?\u003c\/li\u003e\n\u003cp\u003eMake sure that the device you are trying to send a signal to is the receiver (blue-ringed device).\u003c\/p\u003e\n\u003cli\u003eDoes the remote have fresh batteries?\u003c\/li\u003e\n\u003cp\u003eReplacing the Batteries can increase the remote signal strength to help the repeater to have a stronger signal to send.\u003c\/p\u003e\n\u003cli\u003eIs only one device turning blue?\u003c\/li\u003e\n\u003cp\u003eMake sure both of the units are on the same channel. The dial on the bottom side of the device should point towards a number. Changing the number changes the channel they are operating on. This number should be the same on both devices.\u003c\/p\u003e\n\u003cli\u003eAre both devices turning blue, but nothing is happening?\u003c\/li\u003e\n\u003cp\u003eTry using the Emitter cable included with the package. It is teardrop-shaped and has two heads; you may have to try a couple of times, but finding the IR eye of your device and placing one of the heads in front of it can greatly boost reliability.\u003c\/p\u003e\n\u003cli\u003eThe following devices are known to be incompatible.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eYamaha HTR 6140\u003c\/li\u003e\n\u003cli\u003eArris DCX 3520E-M\u003c\/li\u003e\n\u003cli\u003eOSD ATM-7 Speaker Selector device\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cb\u003eInterference:\u003c\/b\u003e\n\u003cp\u003eThe device is to have a blue signal only when it receives a signal from your remote. If it is constantly blue, that means it is receiving interference from a nearby device. The most common culprit for this has proven to be a Mesh network. If it is turning blue constantly, distancing it from nearby devices, and changing the channel the BlastIR units are operating can be helpful.\u003c\/p\u003e\n\n\u003cdiv style=\"padding: 40px; background: #f7f7f7;\"\u003e \n\u003ch3\u003eSee how your feedback has improved this product\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003e7\/28\/17 Increased compatibility with Dish and Cisco boxes\u003c\/em\u003e\u003cbr\u003eMany people use the BlastIR Wireless with their current cable box. Every time we hear a report about a cable box (or any other device) not working with the BlastIR Wireless, we get to work on making the device compatible. This update helps those with a Dish or Cisco box.\u003cbr\u003e\u003cbr\u003e\u003cem\u003e6\/1\/18 Increased compatibility with Explorer, Spectrum, and Samsung boxes\u003c\/em\u003e\u003cbr\u003eFurther widening the range of compatibility of the BlastIR Wireless. This update helps those with Explorer, Spectrum, or Samsung boxes.\u003cbr\u003e\u003cbr\u003e\u003cem\u003e6\/1\/18 Increased font size in manual\u003c\/em\u003e\u003cbr\u003eWe found that the text size in the manual was simply too small. It has been enlarged throughout the manual to better use the space and make it easier to read.\u003cbr\u003e\u003cbr\u003e\u003cem\u003e8\/30\/18 Included magnet feet\u003c\/em\u003e\u003cbr\u003eWith the release of our new Magnet Feet, we have decided to include two in every BlastIR Wireless box. A magnet foot is simply an adhesive rubber \"dot\" with a magnet embedded inside. After placed on the bottom of the BlastIR Wireless \"puck\" you can place it on metal surfaces such as the back of your TV or the TV mount itself. This could also keep the unit in place in your equipment cabinet or rack. We have also included a page in the manual to describe this.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSW-32988 Kit\u003c\/li\u003e\n\u003cli\u003eSW-32988-RX Receiver Only \u003c\/li\u003e\n\u003cli\u003eSW-32988-TX Emitter Only \u003c\/li\u003e\n\u003cli\u003eSW-32988-X Transceiver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWireless Distance: 200m (650 ft.), distance may vary due to obstacles\u003c\/li\u003e\n\u003cli\u003eIR Receiver Distance: 7m (30 ft.)\u003c\/li\u003e\n\u003cli\u003eIR Frequency: 20-60Khz\u003c\/li\u003e\n\u003cli\u003eRF Frequency: 915 Mhz\u003c\/li\u003e\n\u003cli\u003eWirelessly communicates in the 915-917 MHz band\u003c\/li\u003e\n\u003cli\u003ePower: 5V\/0.5A\u003c\/li\u003e\n\u003cli\u003eOptional Cables Included: 3 ft. receiver cable and 10 foot. dual head emitter cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlu-Ray Players (Sony, LG, Samsung, Panasonic, Yamaha)\u003c\/li\u003e\n\u003cli\u003eCable and DVR Boxes (U-Verse, Dish VIP, Fios, Xfinity, DirecTV, Motorola, Cisco, Optimum, TIVO)\u003c\/li\u003e\n\u003cli\u003eAV Receivers (Denon, Sony, Onkyo, Yamaha, Samsung, Bose, LG, Marantz)\u003c\/li\u003e\n\u003cli\u003eLogitech Harmony Hub and Universal Remotes\u003c\/li\u003e\n\u003cli\u003eAnything else that requires an IR signal! If your device does not work, let us know which device and we will pay for any return shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYamaha HTR 6140\u003c\/li\u003e\n\u003cli\u003eArris DCX 3520E-M\u003c\/li\u003e\n\u003cli\u003eOSD ATM-7 Speaker Selector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cp\u003eEach unit comes with the appropriate IR cables, power supply, and mounting accessories.\u003c\/p\u003e\n\u003ch4\u003eDownloads\u003c\/h4\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/BlastIR_Wireless_Manual.pdf?8859336743721916678\"\u003eBlastIR Wireless PRO Manual.pdf\u003c\/a\u003e","brand":"Sewell","offers":[{"title":"Wireless Kit","offer_id":15145166897198,"sku":"SW-32988","price":59.98,"currency_code":"USD","in_stock":true},{"title":"Receiver Only","offer_id":15294641799214,"sku":"SW-32988-RX","price":37.98,"currency_code":"USD","in_stock":true},{"title":"Emitter Only","offer_id":15294641831982,"sku":"SW-32988-TX","price":37.98,"currency_code":"USD","in_stock":true},{"title":"Transceiver","offer_id":16552822439982,"sku":"SW-32988-X","price":36.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/blastir-wireless-pro-ir-repeater-ir-sewell-wireless-kit-sw-32988-326956.jpg?v=1565653342"},{"product_id":"u-link-ul10","title":"Sewell U-Link UL10 USB 2.0 Extender | 200ft over Cat5e\/6, 4 Ports, 480Mbps","description":"\u003ch2\u003eGet More Distance\u003c\/h2\u003e\n\u003cp\u003eUSB 2.0 normally only extends up to 15 feet reliably. The U-Link allows you to extend four USB 2.0 devices up to 200 ft.Many USB extenders draw power from the computer through the USB cable. The problem is that you could experience a drop in voltage making some devices impossible to extend. The U-Link has its own power source to prevent any signal loss and can be plugged into either the sender or receiver.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"Connection Diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/UL10-Diagram-2021.jpg?v=1630466032\"\u003e\u003c\/p\u003e\n\n\u003cdiv style=\"float: right; width:100%; max-width:640px; padding:30px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\n\u003ciframe width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/nTLvsTlYTEo?modestbranding=1;showinfo=0;rel=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"padding: 30px;\"\u003e\n\u003ch2\u003ePlug-and-Play Installation\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eConnect the Sender (TX) to the host computer using the included USB 2.0 cable.\u003c\/li\u003e\n\u003cli\u003eConnect the Sender (TX) to the Receiver (RX) using a Cat5e\/Cat6 cable (sold separately).\u003c\/li\u003e\n\u003cli\u003eConnect the included power supply to either the Receiver (RX) unit or the Sender (TX) unit.\u003c\/li\u003e\n\u003cli\u003eThe U-Link can now be used with any four USB devices.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ch3\u003eMfg. Part Number\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSW-33224\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBrand\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLink by Sewell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ex4 USB 2.0 ports on Receiver (RX)\u003c\/li\u003e\n\u003cli\u003eSingle Cat5e\/6\u003c\/li\u003e\n\u003cli\u003ePlug and Play: no drivers\/software needed\u003c\/li\u003e\n\u003cli\u003eSupports all major OS, including Windows, Mac and Linux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUSB 2.0 (480 Mbps)\u003c\/li\u003e\n\u003cli\u003eOperation Distance: up to 200ft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Extender Transmitter\u003c\/li\u003e\n\u003cli\u003eUSB Extender Receiver\u003c\/li\u003e\n\u003cli\u003e12V DC Power Supply\u003c\/li\u003e\n\u003cli\u003eUSB Cable (A to A)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sewell","offers":[{"title":"Default Title","offer_id":15155445268526,"sku":"SW-33224","price":95.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/u-link-ul10-usb-20-480-mbps-over-cat5e6-200ft-extender-sewell-433146.jpg?v=1565651619"},{"product_id":"sound-link-al10-rca-3-5mm-over-cat5e-6-2000ft","title":"Sewell Sound Link AL10, RCA\/3.5mm over Cat5e\/6, 2000ft.","description":"\u003cp\u003eExtend an audio signal from a 3.5mm or RCA port up to 2000ft away. A built-in switch allows for up to two inputs and two outputs, meaning you can connect two audio sources and switch between them to one of two different sets of speakers or receivers.\u003c\/p\u003e\n\u003cbr\u003e\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/SoundlinkAL10-Diagram.jpg?v=1635362611\" alt=\"Diagram\"\u003e\u003c\/center\u003e\n\u003cp\u003eThe Sound-Link also works to convert 3.5mm to RCA or the other way around. The connection type doesn't even need to be the same, it simply works all the time.\u003c\/p\u003e\n\u003cp\u003eIt is also bi-directional, so you can use either unit as a sender or receiver.\u003c\/p\u003e\n\u003cdiv style=\"float: right; width:100%; max-width:600px; padding:30px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oq8j-8aXPTQ?modestbranding=1;showinfo=0;rel=0\" height=\"1080\" width=\"1920\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding: 30px;\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtends Audio\u003c\/li\u003e\n\u003cli\u003eSwitching Functionality\u003c\/li\u003e\n\u003cli\u003eConverts RCA to 3.5mm and vice versa\u003c\/li\u003e\n\u003cli\u003eSingle Cat5e\/6\u003c\/li\u003e\n\u003cli\u003eNo power required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e\n","brand":"Sewell","offers":[{"title":"Default Title","offer_id":15155590660142,"sku":"SW-32886","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/sound-link-al10-rca35mm-over-cat5e6-2000ft-extender-sewell-851714.jpg?v=1565654065"},{"product_id":"blastir-link-bi-directional-ir-extender-over-cat5e-6","title":"Sewell BlastIR-Link - Bi-Directional IR Extender Over Cat5e\/6 (Up to 980 ft)","description":"\u003cp\u003eThe BlastIR-Link allows you to extend your IR signals up to 980 feet using a single Cat5e\/6 network cable. Each unit is bi-directional so they can both act as a sender or receiver.\u003c\/p\u003e\n\u003cimg alt=\"Connection Diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/blastir_Link_CD_2021_64ad9334-25f4-4016-bd3a-1cb306ed94c6.jpg?v=1631290318\"\u003e\n\u003cdiv style=\"float: right; width:100%; max-width:600px; padding:25px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/n4rNZIoKTC8?modestbranding=1;rel=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding: 30px;\"\u003e\n\u003ch2\u003eEasy Setup\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eConnect the sender and receiver together with a Cat5e\/6 cable.\u003c\/li\u003e\n\u003cli\u003eConnect the IR receivers and emitters to each unit.\u003c\/li\u003e\n\u003cli\u003ePlug in the included power supply on either unit. (only one unit requires a power Supply. The other unit is powered through the Cat5e\/6 cable)\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ch3\u003eBox Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) BlastIR-Link Extender baluns\u003c\/li\u003e\n\u003cli\u003e(1) DC 12V .2A Power Supply\u003c\/li\u003e\n\u003cli\u003e(2) Dual Headed IR Emitters\u003c\/li\u003e\n\u003cli\u003e(2) IR Receiver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBi-directional, either side can pick up or emit IR signals\u003c\/li\u003e\n\u003cli\u003ePower over Cable, only one extender needs to be powered\u003c\/li\u003e\n\u003cli\u003eDistance: 980ft of Cat5e\/6 cable\u003c\/li\u003e\n\u003cli\u003eReceiver Frequency: 30 kHz to 60 kHz\u003c\/li\u003e\n\u003cli\u003eEmitter Frequency: 38 kHz and 56 kHz\u003c\/li\u003e\n\u003cli\u003eRange: 40ft at 38 kHz, 25ft at 56 kHz\u003c\/li\u003e\n\u003cli\u003eReceiver and Emitter Cable Length: 10ft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTroubleshooting\u003c\/h4\u003e\n\u003cdiv style=\"width:100%; max-width:960px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\n\u003ciframe width=\"560 allowfullscreen=\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/le5Y_GTbcbs?rel=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"Sewell","offers":[{"title":"Default Title","offer_id":15155851984942,"sku":"SW-32916","price":44.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/blastir-link-bi-directional-ir-extender-over-cat5e6-ir-sewell-942803.jpg?v=1630696565"},{"product_id":"injectir-pro-dual-band-ir-over-hdmi-for-remote-controls","title":"Sewell InjectIR Pro IR Remote Control Extender over HDMI | Dual Band (33-60kHz)","description":"\u003cp\u003eThe Sewell InjectIR extends the signal from your remote controls (for Blu-Rays, DVRs, set-top boxes, etc.) by sending the remote control's IR (infrared) signal over your HDTV's existing HDMI cable.\u003c\/p\u003e\n\n\u003ch3\u003eThe Problem\u003c\/h3\u003e\n\u003cp\u003eIR signal from most remote controllers require \"Line-of-Sight\" to transmit the signal from the remote to the device. Because of this, when you install your HDTV on a wall, or when you wish to hide your video devices in a media closet or another room, you break that line-of-sight from your remote to the device.\u003c\/p\u003e\n\u003ch3\u003eThe Solution\u003c\/h3\u003e\n\u003cp\u003eThe InjectIR by Sewell is the most reliable and easiest-to-install solution on the market. Unlike other wired solutions, you don't have to run an additional cable through the wall, you simply \"Inject\" the IR signal into the existing HDMI line.\u003c\/p\u003e\n\u003ch3\u003eHow This Works\u003c\/h3\u003e\n\u003cp\u003eThe InjectIR uses the unused CEC channel of your HDMI cable to send the IR signal through it (CEC channel is used only for certain HDTVs that can send control commands to your video sources, so if you use CEC, you don't need to extend your remote controls).\u003c\/p\u003e\n\n\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/connection-diagram_2700a.png?v=1601503010\" alt=\"\"\u003e\u003c\/center\u003e\n\n\u003ch3\u003e60 Second Install\u003c\/h3\u003e\n\u003cp\u003eInstalling the Sewell InjectIR only takes a minute and doesn't require any drilling or cutting into your walls. The kit includes 2 InjectIR dongles that can act as either \"Transmitter\" or \"Receiver\". Each dongle has a 3.5mm port that accepts either the included IR receiver, or Emitter cable.\u003c\/p\u003e\n  \n \u003col\u003e\n   \u003cli\u003eSimply connect one of the InjectIR dongles directly into your TV's HDMI port.\u003c\/li\u003e\n   \u003cli\u003eConnect the existing HDMI cable into the dongle's female HDMI port.\u003c\/li\u003e\n   \u003cli\u003eConnect the \"IR Receiver\" cable into the dongle's 3.5mm port, and place the IR sensor\u003c\/li\u003e\n   \u003cli\u003ePlug in the second dongle into your video source's HDMI port.\u003c\/li\u003e\n    \u003cli\u003eConnect the other end of the existing HDMI cable into this dongle's female HDMI port.\u003c\/li\u003e\n   \u003cli\u003ePlug in the IR emitter Cables into this dongle's 3.5mm port and aim the IR emitters towards the devices you are trying to control.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eNote: This product does not work with an HDMI Splitter.\u003c\/p\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ch3\u003ePlease Note\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis product is NOT compatible with the following models of the AT\u0026amp;T U-verse cable box:\u003c\/li\u003e\n\u003cli\u003eCisco Explorer 4642HDC, IPN 4320, IPN 330HD and the Motorola VIP series. As well as regional providers using the Cisco ISB7150\/7105. There are other models of the U-verse that are also likely incompatible with the InjectIR.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHDMI Female to Male Adapter\u003c\/li\u003e\n\u003cli\u003eDual Band\u003c\/li\u003e\n\u003cli\u003eWill work with dual band devices\u003c\/li\u003e\n\u003cli\u003eWith IR plug\u003c\/li\u003e\n\u003cli\u003e33khz - 60khz Band (Dual Band Emitter)\u003c\/li\u003e\n\u003cli\u003e480i, 480p, 720p, 1080i, 1080p, 4K\u003c\/li\u003e\n\u003cli\u003eHDMI 2.0\u003c\/li\u003e\n\u003cli\u003eGold Plated\u003c\/li\u003e\n\u003cli\u003eAccurate and reliable reproduction of digital video signal, with no signal attenuation or distortion\u003c\/li\u003e\n\u003cli\u003ePlug-and-Play\u003c\/li\u003e\n\u003cli\u003eTransport both audio and video signals\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2 Compliant\u003c\/li\u003e\n\u003cli\u003eUtilizes built in CEC channel\u003c\/li\u003e\n\u003cli\u003eFully molded and compact size\u003c\/li\u003e\n\u003cli\u003eRX\/TX cables are 5 feet long\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - IR Receiver\u003c\/li\u003e\n\u003cli\u003e1 - IR Emitter\u003c\/li\u003e\n\u003cli\u003e2 - HDMI Adapter\u003c\/li\u003e\n\u003cli\u003e1 - QuickStart Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eVideos\u003c\/h4\u003e\n\u003ch3\u003eWhy you need an IR Repeater\u003c\/h3\u003e\n\u003cdiv style=\"width:100%; max-width:960px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/VcC-ZaGybmc\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eTroubleshooting IR Repeaters\u003c\/h3\u003e\n\u003cdiv style=\"width:100%; max-width:960px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/le5Y_GTbcbs\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sewell","offers":[{"title":"Default Title","offer_id":15164871442478,"sku":"SW-30062","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/injectir-pro-dual-band-ir-over-hdmi-for-remote-controls-ir-sewell-588388.jpg?v=1600474385"},{"product_id":"ir-extension-cable","title":"Sewell IR Extension Cable – 3.5mm Stereo IR Signal Extension (6–75 ft Options)","description":"\u003cp\u003e\u003cspan\u003eThe Sewell 25 ft IR Extension Cable provides the perfect solution for extending your IR signal and any other stereo cables. Our advanced design ensures maximum signal transfer and minimizes interference. The high quality stress relief design of the Sewell IR Extension Cable allows optimal flexibility without damaging the cable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch3\u003eMfg. Part Number\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSW-29727-06 6 ft. Cable \u003c\/li\u003e\n\u003cli\u003eSW-29727-10 12 ft. Cable \u003c\/li\u003e\n\u003cli\u003eSW-29727-25 25 ft. Cable \u003c\/li\u003e\n\u003cli\u003eSW-29727-50 50 ft. Cable \u003c\/li\u003e\n\u003cli\u003eSW-29727-75 75 ft. Cable \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBrand\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIR by Sewell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDetails\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnector Type: 3.5mm Stereo Male \/ 3.5mm Stereo Female\u003c\/li\u003e\n\u003cli\u003eLength: 25 ft\u003c\/li\u003e\n\u003cli\u003eJacket Color: Black\u003c\/li\u003e\n\u003cli\u003eJacket Material: PVC\u003c\/li\u003e\n\u003cli\u003eConductor: Bare Copper\u003c\/li\u003e\n\u003cli\u003eUse: IR Extension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sewell","offers":[{"title":"6ft \/ Male to Female","offer_id":15164875374638,"sku":"SW-29727-06","price":8.95,"currency_code":"USD","in_stock":false},{"title":"12ft \/ Male to Female","offer_id":15164875505710,"sku":"SW-29727-10","price":9.95,"currency_code":"USD","in_stock":true},{"title":"25ft \/ Male to Female","offer_id":15164875636782,"sku":"SW-29727-25","price":11.95,"currency_code":"USD","in_stock":true},{"title":"50ft \/ Male to Female","offer_id":15164875767854,"sku":"SW-29727-50","price":13.95,"currency_code":"USD","in_stock":true},{"title":"75ft \/ Male to Female","offer_id":15164875898926,"sku":"SW-29727-75","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/ir-extension-cable-ir-sewell-6ft-male-to-female-sw-29727-06-390201.jpg?v=1579516799"},{"product_id":"blastir-classic","title":"Sewell BlastIR Classic IR Repeater Kit – In-Wall IR Control System for Hidden AV Equipment","description":"\u003cp\u003eSince IR remote control signals need \"line-of-sight\" to work, you will need this extender if the equipment you're trying to control is hidden out of sight such as in a cabinet or A\/V Closet.\u003c\/p\u003e\n\u003cimg style=\"float: right; width:100%; max-width:600px; padding:25px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/BlastIR-Classic-Diagram_2x-50a.jpg?v=1580430041\" alt=\"Connection Diagram\"\u003e\n\u003cdiv style=\"padding: 25px;\"\u003e\n\u003ch3\u003eHow This Works\u003c\/h3\u003e\n\u003cp\u003eThis kit includes an IR receiver, a connecting block, and IR emitters. The IR receiver is a small device that you can mount on your HDTV's bezel or anywhere else in the room where you will want to point your remote. It is small and very easy to hide, but must be in line-of-sight to your couch (or wherever you will be sitting when using your remote control). This IR receiver receives your remote control's commands and sends the signal to the connecting block.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv style=\"float: left; width:100%; max-width:600px; padding:25px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Jth-Urj7QCQ?modestbranding=1;rel=0\" frameborder=\"0\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding: 25px;\"\u003e\n\u003cp\u003eThe connecting block then actively repeats and sends the same signal through all IR emitters connected to the block. You can tape the emitters directly to your equipment or simply fix them to a nearby shelf or wall as long as they are pointing at your device.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ch3\u003ePlease Note\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis product is NOT compatible with the following models of the AT\u0026amp;T U-verse cable box:\u003c\/li\u003e\n\u003cli\u003eCisco Explorer 4642HDC, IPN 4320, IPN 330HD and the Motorola VIP series. As well as regional providers using the Cisco ISB7150. There are other models of the U-verse that are also likely incompatible with the BlastIR.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn-Wall IR Connecting Block\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides one IR receiver input and six IR emitter outputs\u003c\/li\u003e\n\u003cli\u003eWorks with practically all brands of Audio\/Video IR remote controls\u003c\/li\u003e\n\u003cli\u003e12VDC status input jack and LED indicator\u003c\/li\u003e\n\u003cli\u003eInterface: 3.5mm mini plug (for receiver and emitters);\u003c\/li\u003e\n\u003cli\u003eTerminal block (for CAT5)\u003c\/li\u003e\n\u003cli\u003eDimensions: 82 W x 60 H 27 D mm\u003c\/li\u003e\n\u003cli\u003eWeight: 110g (.25 lbs.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDual Band IR Receiver\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be surface mounted in multiple applications.\u003c\/li\u003e\n\u003cli\u003eWorks with practically all brands of Audio\/Video IR remote controls\u003c\/li\u003e\n\u003cli\u003eIR receiving: 18' - 30' (remote control dependent)\u003c\/li\u003e\n\u003cli\u003eReceiving frequencies: 34 - 60 kHz\u003c\/li\u003e\n\u003cli\u003eDimension: 45mm x 15mm x 12mm (receiver only)\u003c\/li\u003e\n\u003cli\u003eIncludes adhesive tape for IR mounting\u003c\/li\u003e\n\u003cli\u003e6 foot cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDual IR Emitters\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be surface mounted in multiple applications.\u003c\/li\u003e\n\u003cli\u003eWorks with practically all brands of Audio\/Video IR remote controls\u003c\/li\u003e\n\u003cli\u003eOperating Frequency: 38 - 56KHz\u003c\/li\u003e\n\u003cli\u003eInterface: 3.5mm mini plug\u003c\/li\u003e\n\u003cli\u003eCable length: 9 feet\u003c\/li\u003e\n\u003cli\u003eIncludes adhesive tape for IR mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - In-Wall IR Connecting Block\u003c\/li\u003e\n\u003cli\u003e4 - Dual IR Emitters\u003c\/li\u003e\n\u003cli\u003e1 - Dual Band Surface Mini IR Receiver\u003c\/li\u003e\n\u003cli\u003e1 - Power Supply\u003c\/li\u003e\n\u003cli\u003e2 - Mounting Screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eVideos\u003c\/h4\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cp\u003eIf you're having troubles with your BlastIR, there are some simple things you can do to troubleshoot the problem. This video will walk you through the steps.\u003c\/p\u003e\n\u003cdiv style=\"width:100%; max-width:960px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/le5Y_GTbcbs?rel=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sewell","offers":[{"title":"Default Title","offer_id":15164877111342,"sku":"SW-29311","price":34.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/blastir-classic-ir-sewell-662054.jpg?v=1578706290"},{"product_id":"blastir-in-wall-emitter-and-receiver-wall-plate-kit","title":"Sewell BlastIR In-Wall IR Extender Wall Plate Kit - Hidden AV Control System with Receiver \u0026 Emitters","description":"\u003cp\u003eHome theaters can come with a lot of equipment. While necessary, all of that equipment can turn your nice home theater into an eyesore. If you want to clean up your setup by putting everything in a closet, your remote control won’t work anymore. That’s because remote controls work by using infrared (IR) signals, which can only work through line of sight.\u003c\/p\u003e\n\u003ch2\u003eThe Solution\u003c\/h2\u003e\n\u003cp\u003eThat’s why you need an IR extender, like the BlastIR Wall Plate Kit. This kit will provide all the parts you need to extend your IR signal to wherever you are hiding all of your equipment. That way you get the clean, professional look you want, but you are still able to use all of your remotes to control your home theater experience. After installation all that you see is a small wall plate.\u003c\/p\u003e\n\u003cimg style=\"float: right; width: 100%; max-width: 600px; padding: 30px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/blastir-connection_o.png?v=1579802959\" alt=\"connection diagram\"\u003e\n\u003cdiv style=\"padding: 30px;\"\u003e\n\u003ch2\u003eHow it Works\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eConnect the IR receiver wall plate BlastIR Classic using cat5e\/6 cable.\u003c\/li\u003e\n\u003cli\u003eConnect the IR emitter cables to the BlastIR Classic.\u003c\/li\u003e\n\u003cli\u003eAttach the IR emitter heads to the IR \"eye\" of the devices you are trying to control.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThis kit comes with two dual-head emitters, but the BlastIR connecting Block can support up to 6 \u003ca href=\"https:\/\/sewelldirect.com\/products\/ir-emitter?variant=15277428506670\"\u003e emitter cables\u003c\/a\u003e to control even more devices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ch3\u003ePlease Note\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis product is NOT compatible with the following models of the AT\u0026amp;T U-verse cable box:\u003c\/li\u003e\n\u003cli\u003eCisco Explorer 4642HDC, IPN 4320, IPN 330HD and the Motorola VIP series. There are other models of the U-verse that are also likely incompatible with the BlastIR.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn-Wall IR Connecting Block\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides one IR receiver input and six IR emitter outputs\u003c\/li\u003e\n\u003cli\u003eWorks with practically all brands of Audio\/Video IR remote controls\u003c\/li\u003e\n\u003cli\u003e12VDC status input jack and LED indicator\u003c\/li\u003e\n\u003cli\u003eInterface:3.5mm mini plug (for receiver and emitters);\u003c\/li\u003e\n\u003cli\u003eTerminal block (for CAT5)\u003c\/li\u003e\n\u003cli\u003ePower supply: 12VDC, 200mA\u003c\/li\u003e\n\u003cli\u003eDimensions: 82 W x 60 H 27 D mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn-Wall IR Receiver Wall Plate\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be surface mounted for multiple applications.\u003c\/li\u003e\n\u003cli\u003eWorks with practically all brands of Audio\/Video IR remote controls\u003c\/li\u003e\n\u003cli\u003eIR receiving: 18' - 30' (remote control dependent)\u003c\/li\u003e\n\u003cli\u003eFrequency range: 34 - 60 kHz\u003c\/li\u003e\n\u003cli\u003eDimension: 114mm x 70mm x 18mm\u003c\/li\u003e\n\u003cli\u003ePower supply: 12VDC, 200mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSingle IR Emitter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be surface mounted for multiple applications.\u003c\/li\u003e\n\u003cli\u003eWorks with practically all brands of Audio\/Video IR remote controls\u003c\/li\u003e\n\u003cli\u003eOperation Frequency: 38 - 56KHz\u003c\/li\u003e\n\u003cli\u003eInterface: 3.5mm mini plug\u003c\/li\u003e\n\u003cli\u003eCable length: 9 feet\u003c\/li\u003e\n\u003cli\u003eIncludes adhesive tape for IR mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDual IR Emitter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be surface mounted for multiple applications.\u003c\/li\u003e\n\u003cli\u003eWorks with practically all brands of Audio\/Video IR remote controls\u003c\/li\u003e\n\u003cli\u003eOperation Frequency: 38 - 56KHz\u003c\/li\u003e\n\u003cli\u003eInterface: 3.5mm mini plug\u003c\/li\u003e\n\u003cli\u003eCable length: 9 feet\u003c\/li\u003e\n\u003cli\u003eIncludes adhesive tape for IR mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - In-Wall IR Connecting Block\u003c\/li\u003e\n\u003cli\u003e1 - In-Wall IR Receiver Wall Plate\u003c\/li\u003e\n\u003cli\u003e2 - Dual IR Emitters\u003c\/li\u003e\n\u003cli\u003e1 - Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch4\u003eVideos\u003c\/h4\u003e\n\u003ch3\u003eTroubleshooting IR Repeaters\u003c\/h3\u003e\n\u003cp\u003eIf you're having troubles with your BlastIR, there are some simple things you can do to troubleshoot the problem. This video will walk you through the steps. Even though we use a BlastIR classic without the wall plate, the same techniques to check the IR signal apply.\u003c\/p\u003e\n.\n\u003cdiv style=\"width: 100%; max-width: 960px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/le5Y_GTbcbs?rel=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sewell","offers":[{"title":"Default Title","offer_id":15164891332654,"sku":"SW-29309","price":49.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/blastir-in-wall-emitter-and-receiver-wall-plate-kit-ir-sewell-431959.jpg?v=1579748589"},{"product_id":"hd-link-hl21-hdmi-extender-matrix-390ft","title":"HD-Link HL21, HDMI Extender\/Matrix, 390ft","description":"\u003ch3\u003eCustomizable Matrix\u003c\/h3\u003e\n\u003cp\u003eA pre-configured matrix may not fit all the needs of your setup, but the HL21 has the versatility to become the most useful tool in your setup sending your signal anywhere, from any place.\u003c\/p\u003e\n\u003cp\u003eIt can be used by itself as a simple \"point-to-point\" setup using a regular Cat5e\/6 cable, or as a customized matrix setup by combining it with a dedicated Gigabit Network Switch and additional\u003ca href=\"https:\/\/sewelldirect.com\/products\/hd-link-hl21-hdmi-extender-matrix-390ft?variant=15164894576686\"\u003eSenders\u003c\/a\u003eand \u003ca href=\"https:\/\/sewelldirect.com\/products\/hd-link-hl21-hdmi-extender-matrix-390ft?variant=15164894543918\"\u003eReceivers.\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cdiv style=\"width:100%; max-width:1080px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\n\u003ciframe width=\"1920\" height=\"1080\" src=\"https:\/\/www.youtube.com\/embed\/KuEJbg15YpI?modestbranding=1;showinfo=0;rel=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eHow This Works\u003c\/h2\u003e\n\u003cp\u003eThe kit comes as a pair, with one sender unit and one receiver unit.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSimply connect the units together with one Cat5e\/6 cable. If you are creating a custom matrix, connect all units to a dedicated network using a gigabit switch.\u003c\/li\u003e\n\u003cli\u003eConnect your HDMI cables from the sender and receiver units to their respective display or source device.\u003c\/li\u003e\n\u003cli\u003ePlug in the included power supplies.\u003c\/li\u003e\n\u003cli\u003eOptional: Connect the included IR cables in the labeled ports to control your source device from the display location.\u003c\/li\u003e\n\u003cli\u003eOptional: Connect RS232 cables to utilize the RS232 pass-through.\u003c\/li\u003e\n\u003cli\u003eYour HDMI extension is now ready.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/32962_o.jpg?v=1578100789\" alt=\"\"\u003e\u003cbr\u003e\n\u003ch2\u003eHL21 Channel System\u003c\/h2\u003e\n\u003cp\u003eThe Matrix customization can be set with the easy-to-use channel system. You can assign a certain channel to a sender and tune in as many needed receivers to that same channel. You can change the channels for each sender\/receivers manually on the units themselves, or through a web application by accessing the HL21's IP address on the network.\u003c\/p\u003e\n\u003ccenter\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/ChannelSystem.jpg?v=1578100816\" alt=\"\"\u003e\u003c\/center\u003e\n\u003ch2\u003eIndividual Receivers and Senders\u003c\/h2\u003e\n\u003cp\u003eThe HL21 will work from a point to point setup by connecting straight from the sender to the receiver, but that was not the main reason for designing this product. While usually the kits are sold together, the main benefit of the HL21 is the ability to configure a matrix-type setup which requires the use of a Gigabit Network Switch. Since this device can extend over \"IP\" it can have up to 64 receivers with the potential of over 250 different senders (\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethis is contingent upon the capabilities of the network.)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/sewelldirect.com\/hd-link-hl21-sender.asp\"\u003eSenders\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/sewelldirect.com\/hd-link-hl21-receiver.asp\"\u003eReceivers\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eare available for purchase separately so you can fully customize the kit to fit your needs.\u003c\/p\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch3\u003eMfg. Part Number\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSW-32962 Kit\u003c\/li\u003e\n\u003cli\u003eSW-32962-RX Receiver\u003c\/li\u003e\n\u003cli\u003eSW-32962-TX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBrand\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLink by Sewell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtends HDMI, IR, and RS232\u003c\/li\u003e\n\u003cli\u003eH.264 Compression\u003c\/li\u003e\n\u003cli\u003eTCP\/IP Support (Many to Many)\u003c\/li\u003e\n\u003cli\u003eSingle Cat5e\/6\u003c\/li\u003e\n\u003cli\u003eLocal Loop Out\u003c\/li\u003e\n\u003cli\u003eLED Display\u003c\/li\u003e\n\u003cli\u003ePC Control (through a web app)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHDMI 1.3, HDCP 1.4\u003c\/li\u003e\n\u003cli\u003eResolution: up to 1080p\u003c\/li\u003e\n\u003cli\u003eOperation Distance: up to 390 ft (120m)\u003c\/li\u003e\n\u003cli\u003eIR Frequency: 38-56 kHz\u003c\/li\u003e\n\u003cli\u003ePower Supply: DC 5V 1A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKIt Package Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHDMI Extender Transmitter\u003c\/li\u003e\n\u003cli\u003eHDMI Extender Receiver\u003c\/li\u003e\n\u003cli\u003eIR Transmitter\u003c\/li\u003e\n\u003cli\u003eIR Receiver\u003c\/li\u003e\n\u003cli\u003e(2) IR Receiver (For control of the extender)\u003c\/li\u003e\n\u003cli\u003e(2) 5V DC Power Supply\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003e(2) IR Remote\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReceiver Package Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHDMI Extender Receiver\u003c\/li\u003e\n\u003cli\u003e(2) IR Receiver Cable\u003c\/li\u003e\n\u003cli\u003e5V DC Power Supply\u003c\/li\u003e\n\u003cli\u003eIR Remote\u003c\/li\u003e\n\u003cli\u003eMounting Ears\u003c\/li\u003e\n\u003cli\u003ePhoenix Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTransmitter Package Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHDMI Extender Transmitter\u003c\/li\u003e\n\u003cli\u003eIR Emitter Cable\u003c\/li\u003e\n\u003cli\u003eIR Receiver Cable\u003c\/li\u003e\n\u003cli\u003e5V DC Power Supply\u003c\/li\u003e\n\u003cli\u003eIR Remote\u003c\/li\u003e\n\u003cli\u003eMounting Ears\u003c\/li\u003e\n\u003cli\u003ePhoenix Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sewell","offers":[{"title":"Kit","offer_id":15164894380078,"sku":"SW-32962","price":199.95,"currency_code":"USD","in_stock":false},{"title":"Receiver Only","offer_id":15164894543918,"sku":"SW-32962-RX","price":79.95,"currency_code":"USD","in_stock":true},{"title":"Sender Only","offer_id":15164894576686,"sku":"SW-32962-TX","price":129.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/hd-link-hl21-hdmi-extendermatrix-390ft-sewell-kit-sw-32962-557915.jpg?v=1565647832"},{"product_id":"blastir-emitter-and-receiver-wall-plate-kit","title":"Sewell BlastIR Wall Plate IR Extender Kit - Emitter \u0026 Receiver System for Hidden AV Equipment","description":"\u003cp\u003eIf you want to clean up your home theater setup by putting all the devices in a closet, your remote control won’t work anymore. That’s because remote controls work by using Infrared (IR) signals, which can only work through \"line of sight\".\u003c\/p\u003e\n\u003cp\u003eThat’s why you need an IR extender. This kit will provide all the parts you need to extend your IR signal to wherever you are hiding all of your equipment. That way you get the clean, professional look you want, but you are still able to use all of your remotes to control your home theater equipment.\u003c\/p\u003e\n\u003cimg style=\"float: right; width: 100%; max-width: 600px; padding: 30px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/ir-connection-wall2_o.png?v=1579737625\" alt=\"connection diagram\" img=\"\"\u003e\n\u003cdiv style=\"padding: 30px;\"\u003e\n\u003ch2\u003eHow it Works\u003c\/h2\u003e\n\u003cp\u003eThe two wall plates connect to each other via any 4-conductors such as 4 wires from a networking cable. It can control up to 6 different devices with the included dual-head emitters. After installation all that you can see is a small wall plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ch3\u003ePlease Note\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis product is NOT compatible with the following models of the AT\u0026amp;T U-verse cable box:\u003c\/li\u003e\n\u003cli\u003eCisco Explorer 4642HDC, IPN 4320, IPN 330HD and the Motorola VIP series. There are other models of the U-verse that are also likely incompatible with the BlastIR.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIR Connecting Block Wall Plate\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides one IR receiver input and three IR emitter outputs\u003c\/li\u003e\n\u003cli\u003eWorks with practically all brands of Audio\/Video IR remote controls\u003c\/li\u003e\n\u003cli\u003e12VDC status input jack and LED indicator\u003c\/li\u003e\n\u003cli\u003eInterface: 3.5mm mini plug (for receiver and emitters)\u003c\/li\u003e\n\u003cli\u003eTerminal block (for CAT5)\u003c\/li\u003e\n\u003cli\u003eDimension: 114mm x 70mm x 37mm (including blank wall plate)\u003c\/li\u003e\n\u003cli\u003ePower supply: 12VDC, 200mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn-Wall IR Receiver Wall Plate\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be surface mounted for multiple applications\u003c\/li\u003e\n\u003cli\u003eWorks with practically all brands of Audio\/Video IR remote controls\u003c\/li\u003e\n\u003cli\u003eIR receiving: 18' - 30' (remote control dependent)\u003c\/li\u003e\n\u003cli\u003eFrequency range: 34 - 60 kHz\u003c\/li\u003e\n\u003cli\u003eDimension: 114mm x 70mm x 18mm\u003c\/li\u003e\n\u003cli\u003ePower supply: 12VDC, 200mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSingle IR Emitter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be surface mounted for multiple applications\u003c\/li\u003e\n\u003cli\u003eWorks with practically all brands of Audio\/Video IR remote controls\u003c\/li\u003e\n\u003cli\u003eOperation Frequency: 38 - 56KHz\u003c\/li\u003e\n\u003cli\u003eInterface: 3.5mm mini plug\u003c\/li\u003e\n\u003cli\u003eCable length: 9 feet\u003c\/li\u003e\n\u003cli\u003eIncludes adhesive tape for IR mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDual IR Emitter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to be surface mounted for multiple applications\u003c\/li\u003e\n\u003cli\u003eWorks with practically all brands of Audio\/Video IR remote controls\u003c\/li\u003e\n\u003cli\u003eOperation Frequency: 38 - 56KHz\u003c\/li\u003e\n\u003cli\u003eInterface: 3.5mm mini plug\u003c\/li\u003e\n\u003cli\u003eCable length: 9 feet\u003c\/li\u003e\n\u003cli\u003eIncludes adhesive tape for IR mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - In-Wall IR Connecting Block Wall Plate\u003c\/li\u003e\n\u003cli\u003e1 - In-Wall IR Receiver Wall Plate\u003c\/li\u003e\n\u003cli\u003e2 - Dual IR Emitters\u003c\/li\u003e\n\u003cli\u003e1 - Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eVideos\u003c\/h4\u003e\n\u003ch2\u003eTroubleshooting IR Repeaters\u003c\/h2\u003e\n\u003cp\u003eIf you're having trouble with your BlastIR Wall Plate kit, there are some simple things you can do to troubleshoot the problem. This video will walk you through the steps. Even though we use a BlastIR classic, the same techniques to check the IR signal apply.\u003c\/p\u003e\n\u003cdiv style=\"width: 100%; max-width: 960px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/le5Y_GTbcbs?rel=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sewell","offers":[{"title":"Default Title","offer_id":15164976398382,"sku":"SW-29310","price":34.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/blastir-emitter-and-receiver-wall-plate-kit-ir-sewell-995114.jpg?v=1579748576"},{"product_id":"ir-receiver","title":"Sewell Keystone IR Receiver – In-Wall IR Receiver Module for IR Repeater Systems","description":"\u003cp\u003eClean home theater setups (especially setups with wall-mounted TVs) can require you to store your A\/V in a remote place like a closet or another room. Since your IR remote controls require line-of-sight to control your equipment, you won't be able to use them unless you can send the signal to your equipment with an extender.\u003c\/p\u003e\n\u003cp\u003eThis IR Receiver is used with any combination of different IR Emitters and connecting blocks. The receiver is mounted on or near your TV. If you're looking to expand your existing IR Extension setup then this is what you're looking for. If you're starting from square one, check out our complete \u003ca href=\"https:\/\/sewelldirect.com\/collections\/ir-extenders\" target=\"_blank\"\u003eIR Receiver Kits.\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cimg style=\"float: right; width:100%; max-width:500px; padding:30px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/P1544037s.jpg?v=1580520251\" alt=\"easy install\"\u003e\n\u003cdiv style=\"padding: 30px;\"\u003e\n\u003ch3\u003eEasy Install\u003c\/h3\u003e\n\u003cp\u003eThe Keystone IR Receiver connects via 3-conductor cable (Such as Cat5e\/6). Once everything is installed, all that will be visible is the wall plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"background: #f2f2f2; padding: 45px;\"\u003e\n\u003cimg style=\"float: left; width:100%; max-width:400px; padding:45px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/P1544036s_800.jpg?v=1580516497\" alt=\"Standard Wall Plates\"\u003e \n\u003cdiv style=\"padding: 45px;\"\u003e\n\u003ch3\u003eFits Standard Keystone Wall Plates\u003c\/h3\u003e\n\u003cp\u003eThe Keystone IR Receiver fits all standard rectangular NEMA keystones. Making it easy to seamlessly integrate it into an existing setup. (Wall plates sold separate)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e\n\n\u003cdiv style=\"width: 100%; max-width: 400px;\"\u003e\n\u003cp\u003e\u003cimg style=\"float: right; width:100%; max-width:500px; padding:30px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/SW-29311_BlastIR_Classic_001.jpg?v=1580507262\" alt=\"BlstIR Classic\"\u003e\u003c\/p\u003e\n\u003cdiv style=\"padding: 30px;\"\u003e\n\u003ch3\u003eBlastIR Classic\u003c\/h3\u003e\n\u003cp\u003eWorks with BlastIR Classic. Simply terminate the corresponding wires to the Terminal block on the BlastIR Classic directly. No additional adapters needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"clear: both;\"\u003e\u003c\/div\u003e\n\n\u003ch4\u003eTroubleshooting\u003c\/h4\u003e\n\u003ch2\u003eTroubleshooting IR Repeaters\u003c\/h2\u003e\n\u003cp\u003eThese steps can help you troubleshoot any IR equipment to determine any possible problems.\u003c\/p\u003e\n\u003cdiv style=\"width:100%; max-width:960px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\n\u003ciframe width=\"1920\" height=\"1080\" src=\"https:\/\/www.youtube.com\/embed\/le5Y_GTbcbs?rel=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReceiver Frequency Range: 34 KHz to 60 KHz\u003c\/li\u003e\n\u003cli\u003eTransmit Frequency Range: 38 KHz to 56 KHz\u003c\/li\u003e\n\u003cli\u003eRange: 40ft @ 38 KHz, 25ft @ 56 KHz\u003c\/li\u003e\n\u003cli\u003ePower: DC 12V, 30 mA max\u003c\/li\u003e\n\u003cli\u003eDimensions: 39.2L x 19.3W x 24.3H mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sewell","offers":[{"title":"Keystone","offer_id":15164980690990,"sku":"SW-32904","price":12.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/ir-receiver-ir-sewell-keystone-sw-32904-350107.jpg?v=1647024766"},{"product_id":"light-link-usb-usb-3-0-over-fiber","title":"Sewell Light-Link USB, USB 3.0 over Fiber","description":"\u003ccenter\u003e\n\u003cp\u003eThe Light-Link is a USB 3.0 Fiber Optic Cable. Because it uses fiber, it can send the signal instantly with no perceptible latency at much longer distances than regular USB extenders. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNote: The 50 and 100 ft versions of this cable are compatible with devices that are USB 2.0 as well as USB 3.0, but it has to be plugged into a USB 3.0 port in order to function! The 30 ft is currently only compatible with USB 3.0 devices.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/center\u003e\u003cbr\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/cutout_md1.jpg?v=1574208633\" alt=\"fiber cutout 1\" style=\"float: right; width: 100%; max-width: 360px; padding: 15px;\"\u003e\n\u003cdiv style=\"padding: 20px;\"\u003e\u003ccenter\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eThe converters inside the cable heads convert incoming electrical signal into optical on one end, and back into electrical on the other end. The Light-Link is composed of two fiber cables and two copper cables. The copper cables are used for non-data information such as +5v power for USB devices. The fiber strands carry all the data information.\u003c\/p\u003e\n\u003c\/center\u003e\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cdiv style=\"padding: 30px;\"\u003e\u003ccenter\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/lightbounce_large.jpg?v=1548951050\" style=\"float: left; width: 100%; max-width: 360px; padding: 35px;\" alt=\"fiber cutout 2\"\u003e \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe light travels down the fibers using internal reflection, which allows the light to bounce off the cable walls similar to a bobsled. Light travels extremely fast (186,000 miles a second) so the signal arrives almost instantly without losing any quality.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/center\u003e\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\u003ccenter\u003e\n\u003cdiv style=\"background: #f3f3f3; padding: 35px;\"\u003e\n\u003ch3\u003eEliminates possible points of failure\u003c\/h3\u003e\n\u003cp\u003eIn a typical long distance USB extension setup, you have many potential points of failure (source to sender, receiver to device, an RJ45 cable in between, and two power adapters for the baluns). The Light-Link extends the signal with zero latency and without having to worry about baluns or power adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/center\u003e\u003cbr\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/P1844654_1200x650_724b53b7-cf9d-4c8f-ab86-f6bdafeab0f5.jpg?v=1667360552\" alt=\"usb power\" style=\"float: right; width: 100%; max-width: 550px; padding: 30px;\"\u003e\n\u003cdiv style=\"padding: 30px;\"\u003e\u003ccenter\u003e\n\u003cbr\u003e\n\u003ch2\u003eOptional Extra power\u003c\/h2\u003e\n\u003cp\u003eThe Light-Link USB features a micro USB-B port to provide Auxiliary power for devices that require a little more power than usual. (Not required for most devices)\u003c\/p\u003e\n\u003c\/center\u003e\u003c\/div\u003e\n\u003ch3\u003eUsing with Oculus Quest?\u003c\/h3\u003e\n\u003cp\u003eYou will need a \u003ca href=\"https:\/\/sewelldirect.com\/products\/sewell-usb-a-to-usb-c-cable-3-1\" target=\"_blank\"\u003eUSB-C cable like this one (Sold Separately)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWorks with Oculus Quest and Quest 2. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eDoes not work with the Valve Index VR Headset\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"width: 100%; max-width: 640px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/MCSZhNlrFBM?rel=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ch3\u003eMfg. Part Number\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSW-33042-30 30 ft. \u003c\/li\u003e\n\u003cli\u003eSW-33042-50 50 ft.\u003c\/li\u003e\n\u003cli\u003eSW-33042-100 100 ft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBrand\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLink by Sewell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 30ft\u003c\/li\u003e\n\u003cli\u003eUp to USB 3.0 speeds \u003cb data-mce-fragment=\"1\"\u003e5Gbps\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRecommended minimum bend radius is about 4 cm when not under tension or about 8 cm when under tension.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sewell","offers":[{"title":"30ft","offer_id":15164981608494,"sku":"SW-33042-30","price":49.98,"currency_code":"USD","in_stock":false},{"title":"50ft","offer_id":15164981641262,"sku":"SW-33042-50","price":89.98,"currency_code":"USD","in_stock":false},{"title":"100ft","offer_id":15164981674030,"sku":"SW-33042-100","price":99.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/light-link-usb-usb-30-over-fiber-light-link-sewell-361384.jpg?v=1667389165"},{"product_id":"ir-emitter","title":"IR Emitter for BlastIR Systems – Dual-Band IR Blaster for Hidden AV Components","description":"\u003cp\u003eUse an IR emitter in conjunction with other equipment (such as an IR Repeater Kit or Entertainment Device) to control your A\/V equipment that is hidden away out of \"line-of-sight\".\u003c\/p\u003e\n\u003cp\u003eSince most remote controls that come with TVs and A\/V equipment use Infrared (IR) signal, they require \"line-of-sight\" to operate. This emitter, along with an IR Repeater Kit allows you to put your video sources (DVD player, Blu-ray player, DVR, etc) out of sight so you can have a clean-looking setup.\u003c\/p\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with practically all brands of Audio\/Video IR remote controls\u003c\/li\u003e\n\u003cli\u003eDesigned to be surface mounted in multiple applications\u003c\/li\u003e\n\u003cli\u003eIncludes adhesive tape for IR mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eVideos\u003c\/h4\u003e\n\u003ch3\u003eTroubleshooting IR Repeaters\u003c\/h3\u003e\n\u003cp\u003eIf you're having troubles with your IR Emitters, there are some simple things you can do to troubleshoot the problem. This video will walk you through the steps. Even though we use a BlastIR classic, the same techniques to check the IR signal apply.\u003c\/p\u003e\n\n\u003cdiv style=\"width:100%; max-width:960px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\u003ciframe width=\"720\" height=\"435\" src=\"https:\/\/www.youtube.com\/embed\/le5Y_GTbcbs?rel=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sewell","offers":[{"title":"Single","offer_id":15277217841198,"sku":"SW-29317","price":8.95,"currency_code":"USD","in_stock":true},{"title":"Dual","offer_id":15277428506670,"sku":"SW-29722","price":9.95,"currency_code":"USD","in_stock":true},{"title":"Quad","offer_id":15277428572206,"sku":"SW-32832","price":11.95,"currency_code":"USD","in_stock":false},{"title":"Shelf","offer_id":15277428604974,"sku":"SW-33040","price":9.95,"currency_code":"USD","in_stock":false},{"title":"Flood","offer_id":15277428637742,"sku":"SW-33024","price":10.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/ir-emitter-ir-sewell-single-sw-29317-306725.jpg?v=1579204510"},{"product_id":"kvaser-obd-ii-extension-cable-2-5-meter-with-male-to-female-obd-ii-connectors","title":"Kvaser OBD II extension cable, With Male to Female OBD II Connectors","description":"\u003cp\u003eKvaser's OBD II Extension Cables are extension cables with male to female OBD II connectors. The cables are made of durable thermoplastic rubber. All pins are connected.\u003c\/p\u003e\n\u003ch3\u003eMajor Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMolded OBD II (SAE J1962) female connector, for Type A (12 Volt) as well as Type B (24 Volt).\u003c\/li\u003e\n\u003cli\u003eMade of durable thermoplastic rubber.\u003c\/li\u003e\n\u003cli\u003eGold plated pins on OBDII connectors for extra reliable contact.\u003c\/li\u003e\n\u003cli\u003eTermination is built in with a 120 Ohm terminating resistor.\u003c\/li\u003e\n\u003cli\u003eAvailable in four different cable lengths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-Year Warranty from Kvaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ch3\u003eMfg. Part Number\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e73-30130-00347-7 (2.5m)\u003c\/li\u003e\n\u003cli\u003e73-30130-00301-9 (5m)\u003c\/li\u003e\n\u003cli\u003e73-30130-00348-4 (10m)\u003c\/li\u003e\n\u003cli\u003e73-30130-00349-1 (15m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCertificates: CE, RoHS\u003c\/li\u003e\n\u003cli\u003eChannels: 1\u003c\/li\u003e\n\u003cli\u003eError Counters Reading: No\u003c\/li\u003e\n\u003cli\u003eError frame generation: No\u003c\/li\u003e\n\u003cli\u003eGalvanic Isolation: No\u003c\/li\u003e\n\u003cli\u003eMaterial: Durable Thermoplastic Rubber\u003c\/li\u003e\n\u003cli\u003eOS: Win XP, Linux, Win 7, Win Vista, Win 8, Win 10\u003c\/li\u003e\n\u003cli\u003eSilent mode: No\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -30 to 85 °C\u003c\/li\u003e\n\u003cli\u003eWeight: 400 g (2.5m), 600 g (5m), 1000 g (10m), 1400 g (15m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003c\/h3\u003e","brand":"Kvaser","offers":[{"title":"2.5 Meter","offer_id":15376361422894,"sku":"SW-29895-2","price":64.98,"currency_code":"USD","in_stock":true},{"title":"5 Meter","offer_id":15376364765230,"sku":"SW-29895-5","price":92.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/kvaser-obd-ii-extension-cable-with-male-to-female-obd-ii-connectors-kvaser-kvaser-616621.jpg?v=1655858219"},{"product_id":"light-link-displayport-cable","title":"Light-Link DisplayPort 1.4 Fiber Optic Cable | 8K 60Hz, 4K 120Hz","description":"\u003ccenter\u003e\n\u003cp\u003eThe Light-Link DisplayPort is a \"DisplayPort over Fiber\" cable that sends the video information through optical fiber. Because it uses fiber, it can send the signal instantly with no perceptible latency at longer distances than regular copper DisplayPort cables.\u003c\/p\u003e\n\u003c\/center\u003e\n\u003cp\u003e\u003cbr\u003e\u003cimg style=\"float: right; width: 100%; max-width: 350px; padding: 25px;\" alt=\"fiber cutout 1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/lightlinkcutout_448c32a2-0f48-45fb-b358-37c02cbe24d5.jpg?v=1574205124\"\u003e\u003c\/p\u003e\n\u003cdiv style=\"padding: 30px;\"\u003e\u003ccenter\u003e\n\u003cbr\u003e\n\u003ch3\u003eHow it Works\u003c\/h3\u003e\n\u003cp\u003eThe converters inside the cable heads convert incoming electrical signal into optical on one end, and back into electrical on the other end. The Light-Link is composed of fiber cables and copper cables. The copper cables are used for non-video information such as hot plug detection, grounding, and +5v power. The fiber strands carry all the video information.\u003c\/p\u003e\n\u003c\/center\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"padding: 30px;\"\u003e\u003ccenter\u003e\n\u003cimg alt=\"fiber cutout 2\" style=\"float: left; width: 100%; max-width: 350px; padding: 25px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/lightbounce_large.jpg?v=1548951050\"\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eThe light travels down the fibers using internal reflection, which allows the light to bounce off the cable walls similar to a bobsled. Light travels extremely fast (186,000 miles a second) so the signal arrives almost instantly without losing any quality.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/center\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"background: #f3f3f3; padding: 35px;\"\u003e\n\u003ch2\u003eBetter than copper\u003c\/h2\u003e\n\u003cp\u003eThe maximum recommended length of regular DisplayPort Cables is about 6-10 ft. for full functionality depending on the quality of the cable. DisplayPort over fiber breaks that barrier allowing extension up to 300ft.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eEasier than any DisplayPort extender\u003c\/h3\u003e\n\u003cp\u003eSince the optical converters are housed inside the heads of the cable, there is no need for any external repeaters. This also means that there is no need for extra power adapters or patch cables.\u003c\/p\u003e\n\u003cp\u003eThe Light-Link eliminates possible points of failure. In a typical DisplayPort extender setup with baluns you have a total of eight connections:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ex4 DisplayPort connections - video source to sender balun and receiver balun to display.\u003c\/li\u003e\n\u003cli\u003ex2 RJ45 connections - transmitter balun to receiver balun.\u003c\/li\u003e\n\u003cli\u003ex2 power connections - from baluns to power outlets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThat's eight possible things that can get unplugged, plugged in the wrong way, or become defective. With the Light-Link you only have one cable that can be easily verified end to end. Troubleshooting is incredibly easy compared to any other setup.\u003c\/p\u003e\n\u003ch3\u003eUsing with Valve Index?\u003c\/h3\u003e\n\u003cp\u003eYou will need a female Displayport to female Displayport Adapter, this was tested using an active extender\u003c\/p\u003e\n\u003cp\u003eYou will need a seperate cable in order to extend the USB on the Valve Index, unfortunately our Light-Link USB cable does not work with the Valve Index\u003c\/p\u003e\n\u003cp\u003eWorks with Valve Index VR headset \u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e8K @ 60Hz\u003c\/li\u003e\n\u003cli\u003e4K @ 120Hz\u003c\/li\u003e\n\u003cli\u003eHDR\u003c\/li\u003e\n\u003cli\u003eDP 1.4\u003c\/li\u003e\n\u003cli\u003eHDCP 2.2\u003c\/li\u003e\n\u003cli\u003eRecommended minimum bend radius is about 4 cm when not under tension or about 8 cm when under tension.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sewell","offers":[{"title":"50","offer_id":16439298129966,"sku":"SW-33052-50","price":139.95,"currency_code":"USD","in_stock":false},{"title":"100","offer_id":16439298162734,"sku":"SW-33052-100","price":139.95,"currency_code":"USD","in_stock":false},{"title":"200","offer_id":40456921677870,"sku":"SW-33052-200","price":189.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/light-link-displayport-cable-extender-sewell-direct-40-sw-33052-40-312434.jpg?v=1570026526"},{"product_id":"sewell-usb-3-1-gen-1-light-link-fiber-extension-cable-with-cmp-jacket-100-ft","title":"Sewell USB 3.1 Gen 1 Light-Link Fiber Extension cable with CMP Jacket","description":"\u003cp\u003eCompatible with most USB 3.0 devices.\u003c\/p\u003e\n\u003cp\u003e\u003ca data-polaris-unstyled=\"true\" class=\"Polaris-Navigation__Item Polaris-Navigation__Item--selected Polaris-Navigation--subNavigationActive\" aria-disabled=\"false\" aria-expanded=\"true\" aria-controls=\":r2i:\" href=\"https:\/\/admin.shopify.com\/store\/sewell-direct\/products\" data-discover=\"true\" tabindex=\"0\"\u003e\u003cspan class=\"Polaris-Navigation__Text\"\u003e\u003cspan class=\"Polaris-Text--root Polaris-Text--bodyMd Polaris-Text--semibold\"\u003eProducts\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIdeal for lower powered USB 3.0 devices. For higher power USB 3.0 devices such as cameras we recommend our \u003ca href=\"https:\/\/sewelldirect.com\/products\/sewell-usb-3-1-gen-1-light-link-fiber-extension-cable-with-standard-jacket-100-ft\" title=\"SW-33176-100 USB Extender\"\u003eSW-33176-100\u003c\/a\u003e cable with improved power delivery. \u003cbr\u003e\u003cbr\u003eMust be plugged in to a USB 3.0 port. Not compatible with USB 2.0\/1.1 devices.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCMP rated jacket for Plenum and Riser spaces.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Part Number:   \u003c\/strong\u003e                                SW-33177-100\u003cbr\u003e\u003cstrong\u003e                                       \u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e                                SW-33177-50\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eData transfer method:   \u003c\/strong\u003e                                Fiber Optic Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable Jacket Type:           \u003c\/strong\u003e                               CMP – Plenum Rated Jacket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUSB Gen:                                                         \u003c\/strong\u003eUSB 3.1 Gen 1 - formerly USB 3.0 (not compatible with USB 2.0\/1.1)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMax power support:                                      \u003c\/strong\u003e5V 380mA for 50 ft. 5V 240mA for 100 ft.(dependent upon source USB port, no external power supply)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMax Data Transfer Rate \u003c\/strong\u003e                                5Gbps\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e                                          China\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupported Operating Systems:\u003c\/strong\u003e                     Windows, Mac OS, Linux – Plug and Play Support\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHS (Harmonized System) Code: \u003c\/strong\u003e                    8544.70\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Sewell","offers":[{"title":"50ft","offer_id":40415620530222,"sku":"SW-33177-50","price":94.98,"currency_code":"USD","in_stock":false},{"title":"100ft","offer_id":40415620562990,"sku":"SW-33177-100","price":119.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/products\/sewell-usb-31-gen-1-light-link-fiber-extension-cable-with-cmp-jacket-100-ft-sewell-direct-371318.jpg?v=1692853912"},{"product_id":"sewell-usb-3-1-gen-1-light-link-fiber-extension-cable-with-standard-jacket-100-ft","title":"Sewell USB 3.1 Gen 1 Light-Link Fiber Extension cable with Standard Jacket","description":"\u003cp\u003eCompatible with most USB 3.0 devices with up to 5V 240\/400mA power delivery. Must be plugged in to a USB 3.0 port. Not compatible with USB 2.0\/1.1 devices. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Part Number:   \u003c\/strong\u003e                                SW-33176-100\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eData transfer method:   \u003c\/strong\u003e                                Fiber Optic Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable Jacket Type:           \u003c\/strong\u003e                               Standard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUSB Gen:                                                         \u003c\/strong\u003eUSB 3.1 Gen 1 - formerly USB 3.0 (not compatible with USB 2.0\/1.1)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMax power support:                                     \u003c\/strong\u003e 5V 380mA for 50 ft. 5V 240mA for 100 ft.(dependent upon source USB port, no external power supply)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMax Data Transfer Rate \u003c\/strong\u003e                                5Gbps\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e                                          China\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupported Operating Systems:\u003c\/strong\u003e                     Windows, Mac OS, Linux – Plug and Play Support\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHS (Harmonized System) Code: \u003c\/strong\u003e                    8544.70\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Sewell","offers":[{"title":"Default Title","offer_id":40339546669102,"sku":"SW-33176-100","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/sewell-usb-31-gen-1-light-link-fiber-extension-cable-with-standard-jacket-and-improved-power-delivery-100-ft-sewell-direct-913125.jpg?v=1724438044"},{"product_id":"light-link-usb-usb-3-1-over-fiber","title":"Sewell Light-Link USB 3.1 over Fiber Cable | 5Gbps, Zero Latency, 100ft","description":"\u003ccenter\u003e\n\u003cp\u003eThe Light-Link is a USB 3.1 Gen 1 (formerly USB 3.0) Fiber Optic Cable. Because it uses fiber, it can send the signal instantly with no perceptible latency at much longer distances than regular USB extenders. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNote: This cable is compatible with devices that are USB 2.0 as well as USB 3.1 Gen 1 (Formerly USB 3.0), but it has to be plugged into a USB 3.1 Gen 1\/USB 3.0 port in order to function! The supplemental power cable will be needed for USB devices that aren't low power.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/center\u003e\n\u003cp\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/cutout_md1.jpg?v=1574208633\" alt=\"fiber cutout 1\" style=\"float: right; width: 100%; max-width: 360px; padding: 15px;\"\u003e\u003c\/p\u003e\n\u003cdiv style=\"padding: 20px;\"\u003e\u003ccenter\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eThe converters inside the cable heads convert incoming electrical signal into optical on one end, and back into electrical on the other end. The Light-Link is composed of two fiber cables and two copper cables. The copper cables are used for non-data information such as +5v power for USB devices. The fiber strands carry all the data information.\u003c\/p\u003e\n\u003c\/center\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"padding: 30px;\"\u003e\u003ccenter\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/lightbounce_large.jpg?v=1548951050\" style=\"float: left; width: 100%; max-width: 360px; padding: 35px;\" alt=\"fiber cutout 2\"\u003e \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe light travels down the fibers using internal reflection, which allows the light to bounce off the cable walls similar to a bobsled. Light travels extremely fast (186,000 miles a second) so the signal arrives almost instantly without losing any quality.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/center\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ccenter\u003e\n\u003cdiv style=\"background: #f3f3f3; padding: 35px;\"\u003e\n\u003ch3\u003eEliminates possible points of failure\u003c\/h3\u003e\n\u003cp\u003eIn a typical long distance USB extension setup, you have many potential points of failure (source to sender, receiver to device, an RJ45 cable in between, and two power adapters for the baluns). The Light-Link extends the signal with zero latency and without having to worry about baluns or power adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/center\u003e\n\u003cp\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/P1844654_1200x650_724b53b7-cf9d-4c8f-ab86-f6bdafeab0f5.jpg?v=1667360552\" alt=\"usb power\" style=\"float: right; width: 100%; max-width: 550px; padding: 30px;\"\u003e\u003c\/p\u003e\n\u003cdiv style=\"padding: 30px;\"\u003e\u003ccenter\u003e\n\u003cbr\u003e\n\u003ch2\u003eOptional Extra power\u003c\/h2\u003e\n\u003cp\u003eThe Light-Link USB features a micro USB-B port to provide Auxiliary power for devices that require a little more power than usual. (Not required for most devices)\u003c\/p\u003e\n\u003c\/center\u003e\u003c\/div\u003e\n\u003ch3\u003eUsing with Oculus Quest?\u003c\/h3\u003e\n\u003cp\u003eYou will need a \u003ca href=\"https:\/\/sewelldirect.com\/products\/sewell-usb-a-to-usb-c-cable-3-1\" target=\"_blank\"\u003eUSB-C cable like this one (Sold Separately)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWorks with Oculus Quest and Quest 2. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eDoes not work with the Valve Index VR Headset\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"width: 100%; max-width: 640px;\"\u003e\n\u003cdiv class=\"embed-youtube\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/MCSZhNlrFBM?rel=0\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ch3\u003eMfg. Part Number\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSW-33042-30 30 ft. \u003c\/li\u003e\n\u003cli\u003eSW-33042-50 50 ft.\u003c\/li\u003e\n\u003cli\u003eSW-33042-100 100 ft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBrand\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLink by Sewell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 30ft\u003c\/li\u003e\n\u003cli\u003eUp to USB 3.0 speeds \u003cb data-mce-fragment=\"1\"\u003e5Gbps\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRecommended minimum bend radius is about 4 cm when not under tension or about 8 cm when under tension.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sewell","offers":[{"title":"30ft","offer_id":40563835928622,"sku":"SW-33184-30","price":89.99,"currency_code":"USD","in_stock":false},{"title":"50ft","offer_id":40563835961390,"sku":"SW-33184-50","price":97.99,"currency_code":"USD","in_stock":true},{"title":"100ft","offer_id":40563835994158,"sku":"SW-33184-100","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/light-link-usb-usb-30-over-fiber-2022-update-light-link-sewell-717691.jpg?v=1703902463"},{"product_id":"hl30-protech-4k-hdmi-over-cat5e-cat6","title":"Sewell HD-Link HL30 4K HDMI Extender Over Ethernet Cat7\/Cat6\/Cat5e with IR 4K 60Hz Ultra HD HDR HDCP 2.2","description":"\u003cp\u003e\u003cspan dir=\"ltr\" role=\"presentation\"\u003eThe Sewell HD-Link HL30 HDMI extender extends a high-quality HDMI video signal, up\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan dir=\"ltr\" role=\"presentation\"\u003eto 4K@60Hz 4:4:4 HDR, over a single Cat6\/Cat5e cable run of up to \u003c\/span\u003e\u003cspan dir=\"ltr\" role=\"presentation\"\u003e70m (230 feet)\u003c\/span\u003e\u003cspan dir=\"ltr\" role=\"presentation\"\u003e. It is\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan dir=\"ltr\" role=\"presentation\"\u003eideal for point-to-point applications requiring high quality video. It also extends the IR\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan dir=\"ltr\" role=\"presentation\"\u003esignal of your remote to easily control your source device\u003cbr\u003e\u003cimg\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/Picture2.jpg?v=1738716167\" alt=\"\"\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSupports resolutions up to 4K@60Hz YUV 4:4:4\u003cbr role=\"presentation\"\u003e* Supports HDCP 2.2 and HDCP 1.4\u003cbr role=\"presentation\"\u003e* Supports High Dynamic Range (HDR) video\u003cbr role=\"presentation\"\u003e* Supports EDID and HDCP passthrough\u003cbr role=\"presentation\"\u003e* Supports data transfer rates up to 6.0Gbps per channel (18Gbps all channels)\u003cbr role=\"presentation\"\u003e* TMDS clock can be up to 600MHz\u003cbr role=\"presentation\"\u003e* Supports 12bit per channel (36bit all channels) deep color\u003cbr role=\"presentation\"\u003e* Supports uncompressed audio such as LPCM\u003cbr role=\"presentation\"\u003e* Supports compressed audio such as DTS, Dolby Digital\u003cbr role=\"presentation\"\u003e* Only one unit needs to be plugged into power and the other unit will receive power over the \u003cbr role=\"presentation\"\u003eethernet cable using Power over Ethernet\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications \u003cbr\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cdiv class=\"p-pdf_iframe__page\" aria-label=\"Page 4\" data-page-number=\"4\"\u003e\n\u003cdiv class=\"textLayer\"\u003e\n\u003cspan role=\"presentation\" dir=\"ltr\"\u003eInput Ports:\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eHDMI x 1, RJ45 x 1, 3.5MM x 1\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eOutput Ports:\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eHDMI x 1, RJ45 x 1, 3.5MM x 1\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eMax Extension Distance\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e: \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e70m (230 feet) for 4K@60Hz 4:4:4\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eVertical Frequency Range:\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e50\/60Hz\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eIR Frequency Range:\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e20-60KHz\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eInterlaced Resolutions: (50\u0026amp;60Hz)\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e480i,576i,1080i\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eProgressive Resolutions: (50\u0026amp;60Hz)\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e480p,576p,720p,1080p,4K@60Hz\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eLimited Warranty:\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e1 Year Parts and Labor\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eOperating Temperature:\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e32°F to 122°F (0\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e to 50\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e)\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e°C°C\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eStorage Humidity:\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e5% to 90% RH non-condensation\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003ePower Supply:\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eDC 12V 1.0A\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003ePower Consumption (Max):\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eSender: 1.3W, Receiver: 1.6W\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eExtender Unit Certifications:\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eFCC, CE, RoHS\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003ePower Supply Certifications:\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eFCC, CE, RoHS\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eDimensions: (LxWxH)\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e2.98 x 2.21 x 0.89 in (75.7 x 56 x 22.6 mm)\u003c\/span\u003e\u003cbr role=\"presentation\"\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eNet Weight:\u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003e \u003c\/span\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eSender\/Receiver: 2.75 oz (78 g)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan dir=\"ltr\" role=\"presentation\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eTroubleshooting \u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eFor customer support, email us at service@sewelldirect.com \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLink LEDs are not lit \/ Units not receiving power? \u003c\/strong\u003eThe power supply might not be fully seated and there is small chance of a faulty power port or adapter.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eCheck that the power is fully seated. Try the power supply in the other unit. Try a different power outlet.  \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNo Sound \/ Sound not as expected?\u003c\/strong\u003e  Potential causes: the output audio format may be unsupported by your display; your HDMI connection may be loose; the audio output may be set to a source other than HDMI. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eUnplug and re-plug your HDMI cables to make sure they are fully seated. check that the output audio format of your source device supported by your display. Check that your source is outputting the sound through the HDMI cable; tis is an especially common problem on Windows or Apple PCs which have several different audio outputs that can be selected. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNo picture or flickering picture?  \u003c\/strong\u003ePotential cause: HDMI connection may be loose; HDMI cable specification is lower than needed; Ethernet cable is loose,  Ethernet cable specification is lower than needed for the distance you are attempting.   \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan role=\"presentation\" dir=\"ltr\"\u003eUnplug and re-plug your HDMI and ethernet cables to make sure that they are fully seated. Try a different HDMI cable or ethernet cable that meets the required specifications. For 4K the HDMI cable should be HDMI 2.0 or higher. For best performance and maximum distance, the ethernet cable should be pure copper Cat6 (or higher) cable.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Sewell","offers":[{"title":"Default Title","offer_id":41256040300590,"sku":"SW-33192","price":79.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/sewell-hd-link-hl30-4k-hdmi-extender-over-ethernet-cat7cat6cat5e-with-ir-4k-60hz-ultra-hd-hdr-hdcp-22-hdmi-extender-sewell-direct-494389.jpg?v=1738724972"},{"product_id":"4k-60hz-wireless-hdmi-extender-using-ipcolor-stream-technology","title":"Sewell 4K 60Hz Wireless HDMI Extender using ipcolor Technology - HD-Link HL35","description":"\u003cp\u003eEmbrace high-quality wireless 4K streaming with the \u003cstrong data-start=\"259\" data-end=\"313\"\u003eSewell HD-Link HL35 4K 60Hz Wireless HDMI Extender\u003c\/strong\u003e. Powered by advanced \u003cstrong data-start=\"335\" data-end=\"364\"\u003eipcolor technology\u003c\/strong\u003e, the HD-Link HL35 delivers stable, crisp video up to \u003cstrong data-start=\"418\" data-end=\"441\"\u003e3840 x 2160 at 60Hz\u003c\/strong\u003e without the clutter of cables. With a 5G wireless range of up to \u003cstrong data-start=\"504\" data-end=\"532\"\u003e100 feet \u003c\/strong\u003e(with minimal obstacles\/interference) it’s perfect for bringing movies, sports, TV shows, or presentations to any room. While it provides excellent video performance for media consumption, it is\u003cstrong\u003e \u003c\/strong\u003enot recommended for fast-paced gaming due to latency and does not support HDR.\u003c\/p\u003e\n\u003cp\u003e(50m max distance with no obstacles or interference)\u003c\/p\u003e\n\u003ch3 data-start=\"786\" data-end=\"809\"\u003e\u003cstrong data-start=\"790\" data-end=\"807\"\u003eKey Features:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-start=\"810\" data-end=\"1441\"\u003e\n\u003cli data-start=\"810\" data-end=\"908\"\u003e\n\u003cstrong data-start=\"812\" data-end=\"838\"\u003eWIRELESS 4K UHD @ 60HZ\u003c\/strong\u003e - Enjoy sharp, smooth 3840 x 2160 video for movies, sports, and TV.\u003c\/li\u003e\n\u003cli data-start=\"810\" data-end=\"908\"\u003e\n\u003cstrong data-start=\"911\" data-end=\"949\"\u003eADVANCED IPCOLOR TECHNOLOGY\u003c\/strong\u003e - Ensures stable, high-quality wireless HDMI transmission.\u003c\/li\u003e\n\u003cli data-start=\"810\" data-end=\"908\"\u003e\n\u003cstrong data-start=\"1013\" data-end=\"1039\"\u003eLONG-RANGE PERFORMANCE\u003c\/strong\u003e - Uses 5G wireless streaming with multiple channels to send your signal up to \u003cstrong data-start=\"1076\" data-end=\"1104\"\u003e100 feet \u003c\/strong\u003e(with limited interference\/obstacles, 50m max distance with no obstacles or interference).\u003c\/li\u003e\n\u003cli data-start=\"810\" data-end=\"908\"\u003e\n\u003cstrong data-start=\"1110\" data-end=\"1141\"\u003eIDEAL FOR MEDIA CONSUMPTION\u003c\/strong\u003e - Perfect for home theaters, media rooms, or professional presentations.\u003c\/li\u003e\n\u003cli data-start=\"810\" data-end=\"908\"\u003e\n\u003cstrong data-start=\"1219\" data-end=\"1247\"\u003eEASY PLUG-AND-PLAY SETUP\u003c\/strong\u003e - Quick installation with no complicated cables or configuration.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"810\" data-end=\"908\"\u003e\n\u003cstrong\u003eWIRELESS IR EXTENSION \u003c\/strong\u003e- Includes Wireless IR remote control extension to control your remote device.\u003c\/li\u003e\n\u003cli data-start=\"810\" data-end=\"908\"\u003e\n\u003cstrong data-start=\"1318\" data-end=\"1337\"\u003eLATENCY NOTE -\u003c\/strong\u003e Adds a very slight delay to signal. Not suited for gaming or other latency sensitive applications.\u003c\/li\u003e\n\u003cli data-start=\"1379\" data-end=\"1441\"\u003e\n\u003cp data-start=\"1381\" data-end=\"1441\"\u003e\u003cstrong data-start=\"1381\" data-end=\"1407\"\u003eSTANDARD 4K VIDEO ONLY\u003c\/strong\u003e - Does not support HDR content.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sewell","offers":[{"title":"Default Title","offer_id":41402920894510,"sku":"SW-33195","price":249.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0015\/8256\/3374\/files\/4k-60hz-wireless-hdmi-extender-using-ipcolor-stream-technology-hd-link-hl35-sewell-387705.jpg?v=1758933085"}],"url":"https:\/\/sewelldirect.com\/collections\/extenders.oembed?page=10","provider":"Sewell Direct","version":"1.0","type":"link"}