Our most secure banana plugs
Silverback banana plugs have the quality you’ve come to expect from Sewell, including gold plated connectors and a heavy-duty casing. What sets these banana plugs apart is the unique dual-screw lock design. This connection will secure your cable more than a single-screw or open-screw design. Dual-screw connectivity provides a secure connection, durability, and a clear signal transmission through the added contact. Silverback Banana Plugs accommodate up to 10 AWG speaker wire.
Easy to install:
- Unscrew the casing to reveal the inner barrel.
- Loosen the two small screws to make room for your speaker wire.
- Slide the casing down the speaker wire before terminating the wire to the inner barrel.
- Feed the speaker wire into the inner barrel of the banana plug.
- Tighten the screws to secure the speaker wire.
- Screw the outer casing back over the inner barrel.
Premium Materials
- 24K Gold plating
- Solid brass banana plug tip and housing
- Aluminum outer sleeve (with brass threaded insert)
- Mini Screwdriver included on the 6 and 12-packs
Straight vs Right-Angle
Both options are great depending on your setup and how close to the wall you need your speakers to be.
Why Banana Plugs?
This banana plug interface is found on audio/video receivers, speaker wall plates, and more. Banana plugs offer an alternative to inserting a bare speaker wire into your equipment. Bare wire connections tend to get pulled out or frizzy after time passes, are prone to corrosion, and are a hassle to insert onto the equipment. Banana plugs offer a quick and secure connection that is both reliable and makes future changes painless.
Specifications
Specifications
- 24K Gold Plating for Durability and Maximum Signal Transfer
- Connectors are made with solid brass
- Double Screws to Secure Speaker Wire
- Maximum accepted AWG: 10 AWG (12 AWG recommended)
- Maximum Jacket OD: 8.5mm (5/16th in)
- Right Angle connectors to reduce strain on cables.
Dimensions
- Total Length: 1 3/4in (45mm)
- Plug Length 0.75in (19.5mm)
- Plug diameter: 0.13-0.18in (3.4-4.7mm)
- Outside Diameter (sleeve): 0.4in (10.5mm)
- Inside Diameter (sleve): 0.34in (8.5mm)
- Sleeve lenght: 1in (25.5mm)
- Outside Diameter (connector): 0.3in (7.7mm)
- Inside Diameter (connector): 0.17in (4.4mm)
- Connector depth 0.59in (15mm)
Videos
Strength Test
We wanted to see how much weight a Silverback Banana Plug could hold. Watch this video to see the results.
N
Nathan Archer Very nice high quality banana plugs!
M
Mark Sheridan Great products
P
Paul White (hotrodpw1960) Heavy duty product that is meant to last, very easy to install.
R
Ronald Brown The only issue I ran into with using 12awg spkr wire is that the set screws were to long and stuck out. So I had to grind them down to fit the aluminum covers over them. I had the straight silverback on before and didn't have this issue at all. After I looked at the straight silverbacks ,then the right angle silverbacks I noticed that the tubes (w/set screws) on the right angle plugs are smaller in diameter than the tubes(w/set screws) on the straight plug. So I only gave a 3 star rating since I should have never had that issue.
You make a good product, but this is disappointing and has me
considering other brands for future banana plug purchases.
R
Richard Chess These banana plugs work well. They hold onto 14 guage speaker wire nicely. The only thing that is dissapointing is that the screwdriver that was included had a deformed head so I had to use the screwdriver included in my straight silverback pack.
