All Sewell, MOS, and Kvaser - Not Epiphan, Prologix or Clearance

The incredible AirStick™ microsuction tape used on the MOS is now available for you to use anywhere. AirStick tape bonds to any smooth, flat, clean...

Since IR remote control signals need "line-of-sight" to work, you will need this extender if the equipment you're trying to control is hidden out o...

Home theaters can come with a lot of equipment. While necessary, all of that equipment can turn your nice home theater into an eyesore. If you want...

Control all of your home theater video sources (Blu-Ray player, Cable box, TiVo, and anything else that uses a standard IR remote control) from be...

The BlastIR-Link allows you to extend your IR signals up to 980 feet using a single Cat5e/6 network cable. Each unit is bi-directional so they can ...

How to Install Deadbolt Spade Connectors: Unscrew the cap of the Deadbolt Spade Connector. Feed the bare conductor of the speaker wire through...

Get the most out of your home audio system by ensuring the best connection from your speaker cable to your receiver with Deadbolt Banana plugs. The...

Get the most out of your home audio system by ensuring the best connection from your speaker cable to your receiver with Deadbolt Banana plugs. Usi...

The new Flex Pin Deadbolt Banana Connectors give you all of the benefits of Banana Plugs for your legacy style receivers and speakers. Standard Ban...

Premium quality sound and video are the result of using premium products. With the Deadbolt Premium Solderless RCA plugs by Sewell, that is exactly...

The EchoSplit allows you to send an HDMI signal to two displays with different resolutions while still letting each display perform at its highest ...

Need to Extend Your IR Signal... Like 12 inches? This is your IR Extender! The most common need for IR extension is bridging a short gap from your ...

This 1x2 HDMI Splitter and Extender kit lets you split one HDMI signal to two displays using cat5e/6 cable, and extend it up to 160ft. Local HDMI ...

The HL13 extends HDMI and IR signal over a TCP/IP network. One "Sender" can be used to extend the signal to multiple HL13 receivers. The HL13 can a...

This 1x4 HDMI Splitter and Extender kit lets you split one HDMI signal to four displays using cat5e/6 cable. It allows you to extend the signal up ...

Customizable Matrix A pre-configured matrix may not fit all the needs of your setup, but the HL21 has the versatility to become the most useful too...

If you commonly install smaller networks using stand RJ45 networking cable, it's important to have the ability of checking your work before everyth...

The Hobbes LANtest is the simplest and most affordable wire-mapping device for networking cables available on the market. It’s a very practical tes...

This simple inexpensive multi-modular testing unit will save you time and money by giving you the ability to instantly test modular-terminated (RJ4...

This all in one Workstation Repair Tool Kit has everything you need for to repair the various components of your workstation and computer. You have...

When you come to the point where you need to start terminating and testing different network cables you will soon realize how many different types ...

The Sewell InjectIR extends the signal from your remote controls (for Blu-Rays, DVRs, set-top boxes, etc.) by sending the remote control's IR (infr...

Use an IR emitter in conjunction with other equipment (such as an IR Repeater Kit or Entertainment Device) to control your A/V equipment that is hi...

The Sewell 25 ft IR Extension Cable provides the perfect solution for extending your IR signal and any other stereo cables. Our advanced design ens...

Clean home theater setups (especially setups with wall-mounted TVs) can require you to store your A/V in a remote place like a closet or another ro...

The Kvaser Ethercan Light HS is a CAN to Ethernet interface that, when linked over the Internet to an Ethernet-equipped PC, allows CAN data to be r...

Kvaser Hybrid 2xCAN/LIN is a flexible, dual channel interface that allows each channel to be assigned independently as CAN or LIN. This makes the K...

The Leaf Light HS v2 J1939-13 Type II provides a simple way of connecting a PC with the on-board computer of any J1939 compliant vehicle or industr...

Kvaser Leaf Light HS v2 M12 is the marine version of the popular Leaf Light v2 interface. It supports a standard USB 2.0 connector and a 5-pin Nati...

The Kvaser Leaf Light HS v2 represents one of the easiest and most affordable ways of connecting a computer to a CAN bus network. With its USB 2.0 ...

The Kvaser Leaf v3 represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network in order to monitor and tran...

Kvaser Memorator Pro 2xHS v2 is a professional-level, dual channel CAN bus interface and standalone data logger offering advanced features such as ...

Kvaser Memorator R SemiPro is an advanced, rugged, two channel CAN (controller area network) to USB interface and standalone data logger - two prod...

Kvaser PCIEcan 4xCAN v2 is a small, yet advanced, CAN multi channel real time CAN interface that handles transmission and reception of standard and...

The Kvaser U100 is a robust, single-channel CAN/CAN FD to USB interface with reinforced galvanic isolation that squarely addresses the needs of the...

The Kvaser USBcan Light 2xHS is a compact, reliable and cost-effective means of connecting two high speed CAN buses to a PC or mobile computer. Wit...

The USBcan Light 4xHS is a compact, reliable and cost-effective means of connecting four high speed CAN buses to a PC or mobile computer. With galv...

The USBcan Pro 2xHS v2 is a USB to dual channel CAN or CAN FD interface with scripting capability. With a standard USB connector and two high-speed...