BlastIR Wireless Pro Receiver Only

Remote Control Extender (IR Receiver)

In Stock

Open Box Items

Starting from: $29.95

"They were the only business that had exactly what I wanted at a reasonable price. It shipped immediately and works well."


Note: This listing is for the "Receiver" unit only.

Control all of your home theater video sources (Blu-Ray player, Cable box, TiVo, and anything else that uses a standard IR remote control) from behind walls or closets by extending the IR signal with this kit.

How this works

It can be combined with other BlastIR Wireless Kits to be used as an "All-to-All" setup, or to create "zones" and only control specific devies.

Ir Applications

Multizone Control

The BlastIR Wireless Pro supports up to 10 zones with independent sending/receiving frequencies. (kind of like different channels on a walkie-talkie). You can change the zone by using a very small rotating switch located at the bottom of the receiver and emitter pucks. The Receivers will only communicate with the Emitters that are set to the same zone.

You can also purchase extra Emitters, or Receivers individually if you do not need an extra full pair.


Channels System


If you already have a BlastIR Wireless PRO and need help setting it up, watch this video. Also feel free to call us and we'll help you set it up over the phone.

Recommended Accessories


IR Emitter Covers



Battery Pack



BlastIR Wireless Emitter



BlastIR Wireless Receiver


See how your feedback has improved this product

Click on a change to see more details

Many people use the BlastIR Wireless with their current cable box. Every time we hear a report about a cable box (or any other device) not working with the BlastIR Wireless, we get to work on making the device compatible. This update helps those with a Dish or Cisco box.
Further widening the range of compatibility of the BlastIR Wireless. This update helps those with Explorer, Spectrum, or Samsung boxes.
We found that the text size in the manual was simply too small. It has been enlarged throughout the manual to better use the space and make it easier to read.
With the release of our new Magnet Feet, we have decided to include two in every BlastIR Wireless box. A magnet foot is simply an adhesive rubber "dot" with a magnet embedded inside. After placed on the bottom of the BlastIR Wireless "puck" you can place it on metal surfaces such as the back of your TV or the TV mount itself. This could also keep the unit in place in your equipment cabinet or rack. We have also included a page in the manual to describe this.


Mfg. Part Number

  • SW-32988-RX


  • IR by Sewell


  • Wireless Distance: 200m (650ft), distance may vary due to obstacles
  • IR Receiver Distance: 7m (30ft)
  • IR Frequency: 20-60Khz
  • RF Frequency: 915Mhz
  • Wirelessly communicates in the 915-917 MHz band
  • Power: 5V/.5A
  • Optional Cables Included

Package Contents

  • 1 - BlastIR Wireless Pro Emitter
  • 1 - IR Receiver Cable
  • 1 - Power Adapter
  • 1 - USB Power Adapter Cable
  • 1 - 3M Adhesive Sticker
  • 1 - Airstick Microsuction Sticker
  • 1 - Quickstart Quide


1 Total Reviews -

See all reviews
(0) 0.0 %
(0) 0.0 %
(0) 0.0 %
(1) 100.0 %
(0) 0.0 %

Not Rated

(0) 0.0 %

Have experience with this product?

Most helpful reviews

Less Than Thrilled

Cheswell - 1/11/2019 11:40:52 PM

0 found this review helpful

Pros: None as of yet!

Cons: Does not work nearly as good as my first set purchased a few years ago. Seventy percent of the time clicks of the remote do nothing! I'll probably just throw it out!

Other: The emitter and the receiver are less than ten feet apart through one wall. The first one I purchased from you is more than 20 feet apart through 3 walls and works great!

Was this review helpful?

See all reviews

Most recent reviews

Less Than Thrilled

Cheswell - 1/11/2019 11:40:52 PM

None as of yet!

Was this review helpful?


Currently no questions are available

Ask us a new question about:
BlastIR Wireless Pro Receiver Only, Remote Control Extender (IR Receiver)