| |
|
 | 9900-41076-00 |
| |
|
| MAudio |
| |
|
| Insert jack (¼” TRS) for outboard processors |
| 2 balanced outputs (¼” TRS) |
| 4 unbalanced outputs (RCA) |
| S/PDIF digital I/O with w/ 2-channel PCM |
| S/PDIF out also supports pass-through of AC-3/DTS surround-encoded content |
| 1 x 1 MIDI I/O with activity LEDs |
| Headphone output (¼” TRS) with level control |
| Headphone A/B source switch for DJ-style cueing |
| Input/playback mix control for hardware direct monitoring |
| Mono switch for input/playback direct monitoring |
| Master output level control |
| Near zero-latency hardware direct monitoring |
| Low-latency ASIO software monitoring |
| USB connection to computer |
| Powered via USB or optional AC power adapter |
| Kensington lock port |
| Mac and PC compatible; class compliant with Mac OS X 10.3.9 and higher |
| * 16-bit/48kHz 2 x 4 operation is class-compliant. Driver installation required to access more I/O. |
| |
|
| Digital Audio Interface Specifications: 48kHz sampling rate unless otherwise stated |
| |
|
| Input Impedance: 2.7k Ohms unbalanced, 5.4k Ohms balanced |
| Maximum Input Level: from +24dBu @ min gain, pad on to -40dBu @ max gain, no pad |
| Channel-to-Channel Crosstalk: < -110dB |
| SNR: -101dB, A-weighted |
| Dynamic Range: 101dB, A-weighted |
| THD+N: 0.005% (-86dB) @ -1dBFS, 1kHz |
| Frequency Response: 20Hz to 20kHz, +/- 0.1dB |
| Pre-amp Gain: >40dB |
| Pad: -20dB pad |
| |
|
| Input Impedance: >220k Ohm, unbalanced |
| Maximum Input Level: From +22dBV @ min gain, pad on to -42dBV @ max gain no pad |
| SNR: -100dB, A-weighted |
| Dynamic Range: 100dB, A-weighted |
| THD+N: 0.005% (-86dB) @ -1dBFS, 1kHz |
| Frequency Response: 20Hz to 20kHz, +/- 0.1dB @ 48kHz sample rate |
| Pre-amp Gain: >40dB |
| Pad: -20dB pad |
| |
|
| Input Impedance 20k Ohms balanced and unbalanced |
| Maximum Input Level: +4.1dBu balanced, +1.9dBV unbalanced |
| Channel-to-Channel Crosstalk: < -110dB |
| SNR: -101dB, A-weighted |
| Dynamic Range: 101dB, A-weighted |
| THD+N: 0.005% (-86dB) @ -1dBFS, 1kHz |
| Frequency Response: 20Hz to 20kHz, +/- 0.1dB @ 48kHz sample rate |
| 20Hz to 40kHz, +/- 0.1dB @ 96kHz sample rate |
| Pad: -20dB pad |
| |
|
| Maximum Level Send: +6dBV, unbalanced |
| Maximum Level Return: +6dBV, unbalanced |
| THD+N 0.00281% (-91dB) @ -1dB from max level, 1kHz |
| Frequency Response: 20Hz to 40kHz, +/- 0.1dB |
| |
|
| Output Impedance: 150 Ohms unbalanced, 300 Ohms balanced |
| Maximum Output Level: +1.8dBV, unbalanced |
| +10.1dBu, balanced |
| Channel-to-Channel Crosstalk: < -108dB |
| SNR: -103dB, A-weighted |
| Dynamic Range: 103dB, A-weighted |
| THD+N: 0.005% (-86dB) @ -1dBFS, 1kHz |
| Frequency Response: 20Hz to 20kHz, +/- 0.3dB @ 48kHz sample rate |
| |
|
| Maximum Output: -2.5dBV at THD < 0.05% into 32 ohms |
| Working Range: 32 to 600 ohms |
| With Drivers: 4x4=16bit/44.1-48Khz, 2x4=24bit/44.1-48Khz, 2-in or 2-out=24bit/88.2-96Khz |
| Class Compliant: 2x4=16bit/44.1-48Khz |
| |
|
| WDM |
| ASIO 2 |
| Core Audio |
| |
|
| Pentium 3 – 500 MHz (higher speed CPU may be necessary for laptops) |
| 256MB RAM |
| DirectX 9.0c or higher |
| Windows XP (SP2) |
| (Windows 2000, 98, 98SE, ME & NT not supported) |
| USB port |
| |
|
| Macintosh G3** 600 / G4** 667MHz (higher speed may be necessary for laptops) |
| 256MB RAM |
| OS X 10.3.9 / 10.4.2 (earlier versions of Mac operating systems are not supported) |
| USB port |
| Dolby AC-3 and DTS pass-through with Apple DVD player |
| * M-Audio suggests that you also check the minimum system requirements for your software, as they may greater than theabove. |
| ** G3/G4 accelerator cards not supported; native FireWire ports required. |
