| |
|
 | WAB-2000H |
| |
|
| Level One |
| |
|
| Self-forming, self-configuration, self-organizing mesh- up to 40 nodes |
| Dual Radios/ Tri-band: IEEE 802.11a/b/g access point and bridge |
| Super G (Turbo A optional) on access point & bridge for 108 Mbps data rates |
| Simultaneously operates in AP, Bridge, or Repeater modes |
| Supports POE function, eliminating power cable management and cost |
| Supports 64/128/152-bit WEP encryptiion |
| Supports AES-CCMP/ WPA2/ IEEE 802.11i wireless security standard |
| Auto-detects & reports rogue APs Supports Dynamic Frequency Selection (DFS) |
| Supports Transmit Power Control (TPC) |
| Rapid deployment, simplified installation |
| Wireless client load balancing |
| Rugged, high throughput with extended range |
| |
|
| 1 x 10/100 Mbps WAN Ethernet port |
| 1 x 10/100Mbps LAN port |
| 3 x External antenna ports WAN Ethernet Setting |
| Fixed IP |
| DHCP client |
| Supports 10/100 Mbps auto negotiation LAN Ethernet Setting |
| 10/100 mbps full/half duplex auto negotiation Device Management: Web Server/ HTTPS |
| Supports SNMP v1, v2, v3 agent |
| Multiple user privileges Power |
| Input Voltage: 48 VDC |
| Injector input: 100~240 VAC, 50~60Hz |
| Power Consumption: 25W Environment & Safety |
| Operating Temperature: -5~+50 |
| Operating Humidity: 0~95% non-condensing |
| EMI/Safety: FCC Class A, CE |
| WLAN1 LED: Activity light/ Link Ind. |
| WLAN2 LED: Activity light/ Link Ind. |
| WLAN LED: Signal Strength |
| Dimensions: 23.5cm(L) x 21.0cm(W) x 7.62cm (H) |
| Weight: 2.5 Kg |
| Wireless interface |
| 802.11a/b/g for AP & bridge with Super G (Turbo A optional) Operation Mode |
| Access Point, Bridge/ Repeater elf-Forming, Self-configuring, self-organizing mesh |
| Up to 40 nodes Channel Number |
| Fixed or automatic select (optimum) Antennas (Default) |
| 2 x 5dBi for 802.11a and 2.5dbi for 802.11b/g Dual band omni directional antenna Security |
| WEP: 64/128/152-bit encryption |
| WPA-PSK |
| WPA (802.1x) –Dynamic Key |
| WPA2/ 802.11i |
| AES-CCMP: 128-bit encryption |
| Enable/disable broadcast SSID |
| MAC address filtering |
| Rogue wireless AP detection with email notification Wireless AP and wireless client activities monitoring Signal strength |
| MAC address listing of wireless clients |
| Ping Utility – Trace route utility |
| Firmware upgrade via web |
| Reboot device |
| Factory default |
