I-7016 is a cost-effective solution for a wide range of valuable industrial control signals and systems. The DCON utility can help users to configure and test I-7016 modules. Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. Users may mount the modules on a DIN rail, panel or wall. Modules have a screw-terminal block to connect to the signals. I-7016 comes with FREE EZ Data Logger Software.
- Analog Input
- Channels: 2
- Analog Input type : mV, V, mA
- Sampling Rate:
- 10 Samples/Second (one-channel mode)
- 2 Samples/Second (two-channel mode)
- Resolution: 16-bit
- Bandwidth: 5.24Hz
- Accuracy: ±0.05% FSR
- Zero Drift: ±0.5μV/ °C
- Span Drift: 25ppm/°C
- CMR @ 50/60Hz: 150dB
- NMR @ 50/60Hz: 100dB
- Input Impedance: 20M Ohms
- Isolation: 3000V rms
- Excitation Voltage Output
- Output Channels: 1
- Output Range: 0 to +10V
- Max OUtput Load: 40mA
- Accuracy: ±0.05% of FSR
- Drift: ±50ppm/ °C
- Output Impedance: 12 Ohms
- Isolation: 3000Vdc
- Digital Input
- Channels: 1
- Logic Level 0: + 1V max
- Logic Level 1: + 3.5V to 30V
- Event Counter
- Max Input Frequency: 50Hz
- Min. Pulse Width:1 mS
- Digital Output
- Channels: 4
- Open Collector to 30V
- Output Load: sink 30mA max
- Power Dissipation: 30mW
- 4 1/2 digit LED display ( I-7016D)
- Communication Interface: RS-485
- Input Voltage Range : +10 ~ +30Vdc
- Power Consumption :
- 2.4W for I-7016
- 3.0W for I-7016
- Din Rail Mount
