Sewell Dual Tip Banana Plug Clips, 10 Pack

Banana Plug Varieties Available at Sewell Direct:

Banana Plugs	Premium Banana Plugs	Silverback Banana Plugs	Deadbolt Banana Plugs	Harpoon Banana Plugs	Dual Tip Banana Plugs	Spade Plugs	Banana Plug Speaker Wire

Dual Tip Banana Plug Clips

Ensure the best connection between your speaker cable and your receiver with these dual tip banana plugs. Banana Plugs offer the easiest way to connect and disconnect speaker wire. Rather than dealing with small screws and clamps on bare, unterminated wire- give your speaker wire the ability to simply plug-in.

How to Install Deadbolt Banana Plugs:

1. Loosen the two small screws located inside the plug, near the head of the plug. Make sure there is enough room to fit your speaker wire into the holes located in the side of the banana plug.
2. Feed the left & right speaker cables into the holes located in the side of the banana plug.
3. Tighten the 2 screws back down to secure the speaker wire to the plug.
4. Your Dual Tip Banana Plug is ready for connection.

Banana plugs make installing speakers much easier. Instead of unscrewing the connectors in the back of your receiver and wrapping the speaker conductor around those screws, utilize the banana plug holes with these banana plugs.

Attaching the banana plug to the speaker itself is easy. These open faced banana plugs allow you to simply feed some of the bare copper conductor into the hole and clamp it down with the screw.

These differ from regular banana plugs because they hold your left and right audio channels in one concise, sturdy connector.