| |
|
 | PIS-3000 |
| |
|
| Level One |
| |
|
| Complies with IEEE 802.3af standard. |
| Turns the peripherals equipped Ethernet port into POE LAN |
| Selectable 5V/12V power output (for POE Splitter) |
| Remote power feeding up to 100 meters |
| Internal Power Supply (for POE Injector) |
| Mix Ethernet and power into RJ-45 port |
| Plug & Play installation |
| Cost-effective POE solution |
| |
|
| Connector: Data and power in: 1 x RJ-45. Data pin 1,2,3,6 Power out: 4,5(V+), 7,8(V-), Data out: 1 x RJ-45, - Data pin 1,2,3,6 - Power out: 5V/2A, 12V/1A (Maximum) Cable |
| Power Jack Diameter: 5.5 x 2.0mm |
| Power Input: DV 48V DIP |
| DIP ON: Output voltage 12V |
| DIP OFF: Output voltage 5V (Default) |
| Dimension: 75mm(L) x 50mm(W) x 23mm(H) |
| Connector |
| Data and power out: 1 x RJ-45. - Power pin: 4,5(V+), 7,8(V-) Power Supply, 100~240V, 50~60Hz, 0.25A |
| Power Input: 48VDC, 300mA |
| LEDs System: power |
| Dimension: 117mm(L) x 60mm(W) x 35mm(H) |
| Standard: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3af Power over Ethernet |
| Network Cable: 10BASE-T: 2-pair UTP/STP Cat. 3,4,5 cable EIA/TIA-568 100-ohm (100m), 100BASE-TX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m) |
| Temperature operating: 0~45-degrees C |
| Storage: 0~70-degrees C |
| Operating Humidity: 0~90%, Non-Condensing |
| Certification: FCC, CE |
