| |
|
 | 523547 |
| |
|
| Intellinet |
| |
|
| 10/100/1000 auto-sensing ports - automatically detect optimal network speeds |
| 4 SFP Mini-GBIC transceiver module slots (use of the SFP port disables the connection of its corresponding copper port automatically) |
| All RJ-45 ports with Auto-MDIX (auto uplink) support |
| Supports NWAY Auto-Negotiation |
| Store and forward switching architecture |
| Full/half duplex operation |
| IEEE 802.3x flow control for full duplex |
| Zero packet loss back pressure flow control for half duplex |
| Non-blocking wire-speed forwarding and filtering |
| Supports port controls (speed, flow control, and maximum frame size) |
| Broadcast storm control with multicast packet rate settings |
| Supports VLAN and Aggregation/Trunking |
| Supports Quality of Service (QoS) with 2 priority levels |
| Supports port mirroring |
| Supports jumbo frames up to 9 kBytes |
| Packet filtering/forwarding rates: 1,488,000 pps (1000 Mbps), 148,800 pps (100 Mbps), 14,880 pps (10 Mbps) |
| Rugged metal housing for maximum durability |
| Supports up to 8192 MAC Address entries |
| Supports SNMP management |
| Configuration via Web browser or RS232 console port |
| Includes 19" rackmount brackets |
| Lifetime Warranty |
| |
|
| SNMPv1 (Simple Network Management Protocol) |
| Media support: - 10Base-T Cat3, 4, 5 UTP/STP RJ-45 - 100Base-TX Cat5 UTP/STP RJ-45 - 1000Base-T Cat5e UTP/STP RJ-45 |
| Packet filter/forwarding rate: - 1.488.000 pps (1000 Mbps) - 148.800 pps (100 Mbps) - 14.880 pps (10 Mbps) |
| Buffer memory: 500 kBytes |
| MAC address table: 8192 entries |
| Backplane speed: 48 Gbps |
| Switch architecture: Store and forward |
| Metal housing, 19" rackmount, 1 U |
| Dimensions: 441 (W) x 130 (L) x 44 (H) mm (17.4 x 5.1 x 1.7 in.) |
| Weight: 2.5 kg (5.4 lbs.) |
| Operating temperature: 0 to 40-degrees C (32 to 104-degrees F) |
| Operating humidity: 10% to 90% RH, non-condensing |
| Storage temperature: -10 to 80-degrees C (-14 to 176-degrees F) |
| Package Contents: Gigabit Ethernet Rackmount Managed Switch, Power cable, User manual |
| |
|
| IEEE 802.3 (10Base-T Ethernet) |
| IEEE 802.3u (100Base-TX Fast Ethernet) |
| IEEE 802.3ab (Twisted Pair Gigabit Ethernet) |
| IEEE 802.1p (traffic prioritization) |
| IEEE 802.1q (VLAN) |
| IEEE 802.3x (flow control, for full duplex mode) |
| |
|
| Link/Act: 1000 Mbps, 10/100 Mbps Power |
| Internal power supply, 100 to 240 V AC, 50/60 Hz |
| Power consumption: 14.5 Watts (maximum) Environmental |
| |
|
| 16 x RJ-45 ports |
| 15 x RJ-45 ports and 1 x SFP Mini-GBIC transceiver module |
| 14 x RJ-45 ports and 2 x SFP Mini-GBIC transceiver modules |
| 13 x RJ-45 ports and 3 x SFP Mini-GBIC transceiver modules |
| 12 x RJ-45 ports and 4 x SFP Mini-GBIC transceiver modules |
| |
|
| 16 x RJ-45 Gigabit Ethernet ports |
| 4 SFP Mini-GBIC transceiver module slots |
| Port link speed: 10 Mbps, 100 Mbps, 1000 Mbps, or auto-negotiation |
| Port bandwidth control: Disable/128/256/512/1024/2048/3072 kbps |
| VLAN: Tag based, up to 24 groups |
| Quality of Service (QoS): 2 priority levels and port-based ratio controlling the ratio between high and low priority |
| Port Mirroring for all ports with sniffer port configuration |
| Port Aggregation/Trunking for all ports, 12 groups |
| SNMP Management (enable/disable, trap IP, community get and set) LEDs |
