| |
|
 | 503143 |
| |
|
| Intellinet |
| |
|
| Rigid aluminum case design with IP30 protection |
| Integrated link loss forwarding (LLF) technology |
| Data transfer rate: 100 Mbps |
| One 10/100Base-TX RJ-45 port, maximum distance 100 m |
| RJ-45 port with Auto MDI/MDI-X support and auto-negotiation |
| One 100Base-FX multimode Fiber SC duplex port |
| Fiber distance support: up to 2 km or 1.24 miles (62.5/125 or 50/125 um cable) |
| Full/half duplex operation |
| Supports IEEE 802.3x flow control on full duplex and back pressure on half duplex |
| LEDs for power, link/activity, full/half duplex |
| DIN rail kit, or wall-mounting ears for 3-way installation |
| Terminal block to provide dual power inputs with reverse polarity protection |
| Lifetime Warranty |
| |
|
| Standards: IEEE 802.3 (10Base-T Ethernet), IEEE 802.3u (Twisted Pair/Fiber Optic Fast Ethernet), IEEE 802.3x (Flow Control, for full duplex mode) |
| Media support: - 10Base-T Cat3, 4, 5 UTP/STP RJ-45 - 100Base-TX Cat5 UTP/STP RJ-45 - 100Base-FX multimode 62.5/125 or 50/125 um Fiber |
| Connectors: - One RJ-45 port, 100Base-TX - One Fiber SC duplex port, 100Base-FX |
| Distances: - 2 km or 1.24 miles (62.5/125 or 50/125 um Fiber cable) - 100 m or 328 ft. (RJ-45 cable) |
| Wavelength: 1310 nm Link Loss Forwarding |
| A failure of the TX connection will force the fiber port to disconnect |
| A failure of the fiber connection will force the TX port to disconnect DIP Switches |
| DPSW1: enable/disable port alarm |
| DPSW2: enable/disable LLF (link loss forwarding) |
| DPSW3: full/half duplex |
| DPSW4: auto-negotiation/100 Mbps LEDs |
| Power: LINK/TX, Full/half duplex, Collision, Fault Power |
| Power supply: - Input voltage: 24 V DC (12 – 48 V DC), dual inputs - Reverse polarity protection: present |
| Power consumption: 4.6 Watts (maximum) Environmental Aluminum housing, IP30 protection |
| Dimensions: 53 (W) x 135 (H) x 105 (D) mm (2.1 x 5.3 x 4.1 in.) |
| Weight: 1.15 kg (2.5 lbs.) |
| Operating temperature: -10 – 70-degrees C (14 – 158-degrees F) |
| Operating humidity: 5 – 95% RH, non-condensing |
| Storage temperature: -40 – 85-degrees C (-40 – 185-degrees F) |
| Regulatory Approval: EMI: - FCC Class A - EN55022 Class A, EMC: - EN61000-4-2 - EN61000-4-3 - EN61000-4-4 - EN6100-4-5 - EN6100-4-6 - EN6100-4-8 - EN6100-4-11 |
| Safety: - UL - cUL - CE/EN60950 |
| Shock: IEC 60068-2-27 |
| Free fall: IEC 60068-2-32 |
| Vibration: IEC 60068-2-6 |
| MTBF: 225,855 hours - Calculated MTBF is based on MIL-HDBK-217F (Military Handbook) standard |
| Package Contents: Industrial Fast Ethernet Rail Converter, Quick start guide, Software and documentation CD-ROM, Wall-mounting plate and six screws |
