Embedded Controller with Developing Tool Kit, 512K Flash

I-7188EX is a compact Embedd Controller with a developing tool kit. It has one serial RS-232 port, one RS-485 port and one Ethernet port. It has an 80188-40 processor with 512K bytes of static RAM, and 512K bytes of Flash memory. It has 16 KB of on-chip buffer memory and 10Base-T media interface. The I-7188EX also provides 14 user defined I/O lines. A cost-effective I/O expansion board with A/D, D/A, relay drivers and protected inputs is available. The I-7188EX also supports battery back-up SRAM disk board and Flash-Rom board, providing non-volatile mass storage from 2 megabytes to 64 megabytes. The 10BASE-T port is equipped with a RJ-45 connector. The 10BASE-T interface supports max. 100-meter Cable length between I-7188EX and the network hub. Expansion boards are available to upgrade the capabilities of this controller.

TCP/IP library

The software library supports TCP/IP protocols & web server. Support the following protocols.

• TCP, Transmission Control Protocol:
  

  Transport layer with connections, flow control and error correction

• UDP, User Datagram Protocol:
  

  Simple connectionless transport layer

• IP, Internet Protocol:
  

  The network layer

• ICMP, Internet Control Message Protocol:
  

  Part of IP for practical purposes

• ARP, Address Resolution Protocol:
  

  Retrieves a host's network controller's hardware address, given the host's Internet address

• Reverse Address Resolution Protocol:
  

  Retrieves a host's Internet address, given the host's network controller's