Take your high definition
component signal (generally comes from 3 RCA ports: red, green, and blue) from sources such as Wii, Apple TV, Set top boxes, DVD players, etc. and put them up on a VGA screen.
1. Y-Pb-Pr: To connect Y-Pb-Pr interface of the input device;
2. L/R: Stereo Audio Input;
3. Audio Input: Connect Audio from PC;
4. Audio Output: Connect to stereo/speakers;
5. LED: Red LED: PC Host input; Green LED: Component Video input;
6. Menu/Up/Down: Function Key
7. DC/5V/1A: Connect power supply
8.
VGA-IN: Connect PC host
9. VGA-OUT: Connect PC Monitor or LCD
(1)MENU
- Click it to enter into OSD menu;
- Press it and hold on for 3 seconds: Switch between VGA and Component video input;
- Press it and hold on for 10 seconds: Default setting (Output resolution: 1024×768);
(2)UP
-Under OSD Menu, press it to select different items of function;
-Under the menu of adjusting brightness, contrast, saturation, hue adjustment, press it to increase the value;
-Under the menu of resolution setting, click it to select output resolution;
-OSD menu is closed, click it to select 4:3, 16:9 or full screen display modes;
(3)DOWN
- Under OSD menu, click it to select different item of functions;
- Under the menu brightness, contrast, saturation, hue adjustment, click it to decrease the value;
- Under the menu of resolution setting, click it to select output resolution.
