The Atlona AT-DVI15SRS is a perfect solution for those who need to extend DVI signal over long distance, over single cat5 or cat6. The Atlona DVI Extenders can handle any resolution up to 1280x1024 at...

Average Rating - 4.5:

2 ratings

Extend the distance of your DVI dual-link cable past the 15 feet recommended limit with the Gefen DVI DL Booster. The Booster maintains HDTV quality and is easy to setup.

Average Rating - 5.0:

2 ratings

The Gefen DVI Super Booster is a great cost-effective way to extend your high-definition DVI signal over large distances.

Save tons of money and extend your DVI source up to 100 feet with a single Cat5 cable and this balun set.

These DVI to fiber modules will allow you to carry an extremely high-resolution DVI video signal (up to 1920x1200) over fiber up to 5000 ft. away from the source.

The DVI*2500HD uses 4 fibers to extend Dual Link DVI display up to 6,600 feet away from your source. Dual link DVI describes the use of all 24 pins of the DVI (digital visual interface) connector to achieve...

Add an extra monitor or projector anywhere along your network or through any Cat5 cable with this ethernet to DVI solution.

This extender sends your DVI signal, including control and HDCP signals, up to 1640 feet over LC-LC fiber optic cable, the fastest and most lossless format there is.

This complete kit sends your DVI signal, including control and HDCP signals, over 150 ft. of LC-LC fiber optic cable, the fastest and most lossless format there is. You can send the signal up to 1600...

Go far beyond the 15-foot DVI specified limit with this super booster, allowing you to use DVI copper cable runs that are 200 feet long.

Send multiple DVI signals to new places economically over Cat5 cable with the 4x4 DVI Cat5 Distribution Amplifier.

Take your DVI signal to new frontiers with the DVI extender which carries your DVI signal up to 2000 feet away from its source over four strands of LC fiber.