- In Stock (39)
- Out of Stock (4)
- Pre-Order (2)
- $1.00 - $30.00 (1)
- $30.00 - $65.00 (2)
- $65.00 - $135.00 (8)
- $135.00 - $305.00 (17)
- $305.00 - $58,005.00 (18)

This splitter from Apogee takes an HDMI signal and turns it into two identical mirrored signals for two HDMI displays. Now compatible with HDMI 1.3






Route high definition video in multiple resolutions up to 1080p plus multichannel digital audio from any of the four HDMI sources to the displays. Four outputs give you the choices of sending high definition...






Economically split your HDMI signal using this gold-plated splitter cable with one HDMI male interface to two HDMI female interfaces.

Send your HDMI 1.3 signal simultaneously to 4 different displays in locations up to 82 feet from the splitter from one single source with the Accell UltraAV HDMI 1.3 1:4 splitter.






The Accell UltraAV HDMI version 1.3 splitter is the perfect way to duplicate the same audio/video signal on a second display simultaneously with the first display from one single Audio/Video source.






For high-end, high definition performance, you need a high-powered amplified distribution splitter. The Gefen HDMI splitter for one source and two displays will handle any job.

The Atlona AT-HDMI-V42 is a high performance HDMI switcher with remote control. AT-HDMI-V42 is built on the HDMI 1.3 platform and can pass resolutions up to 1440p and lower (such as 1080p, 1080i, 720p...

Gefen's HDMI over Cat5 system will revolutionize the way you think of HDMI distribution and signage. This is an extra receiver for any of the related Gefen HDMI Cat5 distribution systems.

This all-in-one distribution amplifier will take one HDMI signal and multiply it by 8, sending each of the 8 signals over Cat5 cable to locations that are far away.

Using one HDMI source, you can transmit up to a 1080p signal on 3 displays with the Gefen HDMI splitter 1 x 3.






This single box offers several different solutions all in one including DVI with audio to HDMI conversion, source switching, and splitting with HDCP compliance.






Distribute 4 identical signals to 4 HDMI displays with this splitter, which includes a built-in switch allowing you to choose between 2 HDMI sources for distribution.













