| |
|
 | PRO 35 |
| |
|
| AudioTechnica |
| |
|
| UniMount® clip permits accurate positioning, provides shock resistance, and protects elements |
| Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source |
| Extended frequency response captures subtle nuances of the performance |
| 6' (1.8 m) cable permanently attached between microphone and power module |
| |
|
| ELEMENT Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN Cardioid |
| FREQUENCY RESPONSE 50-15,000 Hz |
| LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave |
| OPEN CIRCUIT SENSITIVITY -45 dB (5.6 mV) re 1V at 1 Pa |
| IMPEDANCE 250 ohms |
| MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 KHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) 115 dB, 1 KHz at Max SPL |
| SIGNAL-TO-NOISE RATIO 64 dB, 1 KHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical |
| SWITCH Flat, roll-off |
| WEIGHT (MICROPHONE) 0.3 oz (8 g) |
| WEIGHT (POWER MODULE) 2.9 oz (81 g) |
| DIMENSIONS (MICROPHONE) 0.98" (25.0 mm) long, |
| 0.40" (10.2 mm) diameter |
| DIMENSIONS (POWER MODULE) 3.66" (92.9 mm) long, |
| 0.74" (18.9 mm) diameter |
| OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type |
| CABLE 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector |
| |
|
| Cardioid Condenser, High-SPL Mic |
| AT8418 UniMount® microphone instrument mount |
| AT8538 power module |
| Soft protective pouch |
