| |
|
 | ATM250DE |
| |
|
| AudioTechnica |
| |
|
| Audio-Technica’s proven dual-element design features two elements (condenser and dynamic) enclosed in a single housing |
| Neodymium dynamic element provides punch and attack, while the condenser element captures the full audio spectrum |
| Elements are positioned in a perfect phase relationship, something practically unachievable with two separate microphones |
| Perfect for kick drum, guitar amps, and instrument use |
| Integral 80 Hz HPF switch and 10 dB pad (condenser element) |
| Versatile mounting options and effective dampening of mechanical noise thanks to included AT8471 isolation clamp |
| Corrosion-resistant contacts from gold-plated XLRM-type connector |
| Rugged, all-metal design and construction for years of trouble-free use |
| |
|
| Element: Condenser, dynamic |
| Polar Pattern: Cardioid (condenser), Hypercardioid (dynamic) |
| Frequency Response: 40-20,000 Hz (condenser), 40-15,000 Hz (dynamic) |
| Low Frequency Roll-off: 80 Hz, 12 dB/octave (condenser) |
| Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa (condenser), –53 dB (2.2 mV) re 1V at 1 Pa (dynamic) |
| Impedance: 50 ohms (condenser), 600 ohms (dynamic) |
| Maximum Input Sound Level: 148 dB SPL, 1 KHz at 1% T.H.D. (condenser) |
| Dynamic Range (typical): 122 dB, 1 KHz at Max SPL (condenser) |
| Signal-to-Noise Ratio: 68 dB, 1 KHz at 1 Pa (condenser) |
| Phantom Power Requirements: 11-52V DC, 3.5 mA typical (condenser) |
| Switches: Flat, roll-off; 10 dB pad (condenser only) |
| Weight: 320 g (11.3 oz) |
| Dimensions: 143.6 mm (5.65") long, 55.0 mm (2.17") diameter |
| Output Connector: Integral 5-pin XLRM-type |
| Cable: 5.0 m (16.5') dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors |
| Accessories Furnished: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 adapter; soft protective pouch |
| Audio-Technica Case Style: R9 |
