| |
|
 | ATM350 |
| |
|
| AudioTechnica |
| |
|
| Low-profile design for minimum visibility |
| UniMount® clip permits accurate positioning, provides shock resistance, and protects element |
| Unique violin mount permits unobtrusive placement of microphone between the instrument’s bridge and tailpiece |
| Crisp, clear, well-balanced response, even at high SPLs |
| Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source |
| Interchangeable elements available for hypercardioid and omnidirectional polar patterns |
| Corrosion-resistant contacts from gold-plated XLRM-type connector |
| Rugged, all-metal design and construction for years of trouble-free use |
| |
|
| Element: Fixed-charge back plate permanently polarized condenser |
| Polar Pattern: Cardioid |
| Frequency Response: 40-20,000 Hz |
| Low Frequency Roll-off: 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa |
| Impedance: E 50 ohms |
| Maximum Input Sound Level: 149 dB SPL, 1 KHz at 1% T.H.D. |
| Dynamic Range (typical): 122 dB, 1 KHz at Max SPL |
| Signal-to-Noise Ratio: 67 dB, 1 KHz at 1 Pa |
| Phantom Power Requirements: : 11-52V DC, 3.5 mA typical |
| Switches: Flat, roll-off |
| Weight (Microphone):14.5 g (0.5 oz) |
| Weight (Power Module): 81.2 g (2.9 oz) |
| Dimensions (Microphone): 37.8 mm (1.49") long,, 12.2 mm (0.48") diameter |
| Dimensions (Power Module): 92.9 mm (3.66") long, 18.9 mm (0.74") diameter |
| Output Connector (Power Module): Integral 3-pin XLRM-type |
| Cable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connector |
| Accessories Furnished: AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch |
| Audio-Technica Case Style: M36 |
