| |
|
 | AE3300 |
| |
|
| AudioTechnica |
| |
|
| Exceptional performance for exceptional performers |
| Same element as the classic AT4033 studio microphone |
| Well-tempered polar pattern with outstanding rejection qualities |
| Superior anti-shock engineering ensures low handling noise and quiet performance |
| High-quality double-sided PCB uses surface-mount components. Extensive grounding plane and attention to best-practice grounding methods minimize electrical noise |
| Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source |
| Multistage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity |
| Robust all-metal design for enduring dependability on the road |
| Quiet-Flex™ stand clamp provides silent, flexible microphone positioning |
| Integral 80 Hz HPF switch and 10 dB pad |
| |
|
| Element: Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern: Cardioid |
| Frequency Response: 30-18,000 Hz |
| Low Frequency Roll-off: 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa |
| Impedance: 150 ohms |
| Maximum Input Sound Level: 147 dB SPL, 1 KHz at 1% T.H.D.; 157 dB SPL, with 10 dB pad (nominal) |
| Noise: 19 dB SPL |
| Dynamic Range (typical): 128 dB, 1 KHz at Max SPL |
| Signal-to-Noise Ratio: 75 dB, 1 KHz at 1 Pa |
| Phantom Power Requirements: 11-52V DC, 3 mA typical |
| Switches: High-pass filter; 10 dB pad (nominal) |
| Weight: 10.6 oz (300 g) |
| Dimensions: 7.05" (179.0 mm) long, 1.97" (50.0 mm) head diameter, 1.30" to 0.87" (33.0 mm to 22.0 mm) tapered body diameter |
| Output Connnector: Integral 3-pin XLRM-type |
| Accessories Furnished: AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
| Audio-Technica Case Style: T4 |
