| |
|
 | AE5100 |
| |
|
| AudioTechnica |
| |
|
| Large-diaphragm capsule delivers accurate and natural response |
| Low-profile design permits innovative placement options previously unattainable with a large-diaphragm condenser |
| Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source |
| Robust design for enduring dependability on the road |
| Includes isolation clamp for shock protection, secure mounting, and easy positioning |
| Integral 80 Hz HPF switch and 10 dB pad |
| |
|
| Element: Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern: Cardioid |
| Frequency Response: 20-20,000 Hz |
| Frequency Response: 20-20,000 Hz |
| Low Frequency Roll-off: 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity: -36 dB (15.8 mV) re 1V at 1 Pa |
| Impedance: 150 ohms |
| Maximum Input Sound Level: 148 dB SPL, 1 KHz at 1% T.H.D.; 158 dB SPL with 10 dB pad (nominal) |
| Nosie: 11 dB SPL |
| Dynamic Range (typical): 137 dB, 1 KHz at Max SPL |
| Signal-to-Noise Ratio: 83 dB, 1 KHz at 1 Pa |
| Phantom Power Requirements: 11-52V DC, 3.2 mA typical |
| Switches: High-pass filter; 10 dB pad (nominal) |
| Weight: 5.0 oz (143 g) |
| Dimensions: 5.85" (148.5 mm) long, 1.02" (26.0 mm) maximum diameter |
| Output Connector: Integral 3-pin XLRM-type |
| Accessories Furnished : AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8136 windscreen; soft protective pouch |
| Audio-Technica Case Style: S4 |
