| |
|
 | CMX-144 |
| |
|
| Audio Authority |
| |
|
| 4x4 matrix switches component video, analog stereo audio, digital coaxial audio, and digital optical audio |
| Cross-Converts digital audio - digital coax and optical sources are converted and output as both formats simultaneously |
| Breakaway switching - switch audio and video independently |
| Capacitive touch front panel - no physical buttons to wear out |
| Web interface for control over LAN |
| Manufactured in the USA |
| |
|
| Component video (YPbPr) - 4/4 |
| Digital audio (coaxial and optical) - 4/4 |
| Analog stereo audio (L/R) - 4/4 |
| |
|
| Ethernet (web interface and direct control) |
| RS-232 Serial |
| Front panel IR receiver |
| Rear panel IR jack (connecting block type or 3.5 mm jack) |
| Front panel capacitive touch buttons |
| |
|
| Video Formats: 480i/p, 576i/p, 720p, 1080i/p |
| Input/Output Impedance: 75 ohms |
| Input Ground Isolation: No |
| Gain: 1 |
| Gain Accuracy: 2% |
| 3dB Bandwidth: 180MHz |
| Input Coupling: AC |
| S/N Ratio: 65dB |
| Max Gain / Equalization: 1.00 gain |
| |
|
| Input Impedance: 75 ohms/50K ohms |
| Min Load Impedance: 75 ohms/10K ohms |
| Multi-channel Digital: Yes |
| Frequency Response: 10-50KHz |
| S/N Ratio: 80dB |
| THD+Noise: 0.02% |
| Crosstalk: 70dB |
| |
|
| Connector Types: RCA (YPbPr, analog audio, digital coaxial audio), Toslink (digital optical) |
| Dimensions (inches, HxWxD): 3.5 x 16.625 x 8.625 |
| Shipping Weight: 11.15 lb |
| Agency Approvals: FCC |
| DC Input Connector: 5.5 x 2.1mm |
| DC Input Voltage / Polarity: 12V/Center Positive |
| Max DC Input Current: 350mA |
| Heat Output: 22 BTU/hr |
| |
|
| Power Supply (Model 571-013) |
| IR Remote Control (Model 1106) |
| Rack Mount Ears (Model 1192A) |
| User Manual |
